DataSheetWiki


HAD030ZGE-A fiches techniques PDF

Power-One - DUAL OUTPUT/ 30 WATT

Numéro de référence HAD030ZGE-A
Description DUAL OUTPUT/ 30 WATT
Fabricant Power-One 
Logo Power-One 





1 Page

No Preview Available !





HAD030ZGE-A fiche technique
(888) IPD-CONVerters q (888) 473-2668 q www.ipdconverters.com
HAD SERIES - DUAL OUTPUT, 30 WATT
DESCRIPTION
HAD dual output DC/DC converters feature high
efficiency, open-frame packaging, and 1500 VDC
isolation. The HAD family allows board designers
to deliver any combination of power from
either output, up to each model’s maximum rating.
The HAD uses planar magnetics and has an MTBF of
over a million hours.
FEATURES
• Independent Dual 5V and • Trim And Enable Pins
3.3V Outputs
• Fixed Frequency
• Flexible Load Sharing • 1500V Isolation
• High Efficiency Topology • Planar Magnetics
• Open-Frame Design
TECHNICAL SPECIFICATIONS
Voltage Range
24 VDC / 48 VDC Nominal
Reflected Ripple
Input Reverse Voltage Protection
Input Transient Withstand
UVLO 24V Input / 48V Input
Inrush Current Limit
Input
18 - 36 / 34 - 75 VDC
60 mA
Shunt Diode
100 V/100 ms
17V on, 15V off / 33V on, 30V off
1A2/S
Output
Setpoint Accuracy
Line Regulation Vin Min. - Vin Max., Iout Rated
Load Regulation Iout Min. - Iout Max., Vin Nom.
Minimum Output Current, 5V/3.3V
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
Voltage Trim Range
Power Limit Threshold Range, % of Iout Rated
OVP Trip Range
OVP Type
Overcurrent Protection Type
General
Turn-On Time
Remote Shutdown1
Switching Frequency
Isolation
Input - Output
Input - Case
Output - Case
Temperature Coefficient
Case Temperature
Operating Range
Storage Range
Thermal Shutdown Range
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
MTBF(Bellcore TR-NWT-000332)
Safety
Weight (approx.)
±1%
1.0% Vout
1.0% Vout
300 mA/500 mA
25% Iout
4% Vout
500 µs
±10%
110 - 140%
115 - 140% Vout Nom.
Hiccup
Continuous
Efficiency vs. Load (48V Input)
80
75
70
65
60
HAD030ZGE-A
55
50
45
40
10 20 30 40 50 60 70 80 90 100
LOAD %
10 ms
Positive Logic
500 kHz
1500 VDC
1050 VDC
500 VDC
0.03%/°C
-40 To +100°C
-40 To +125°C
105 To 115°C
95%
5g
1.3 x 106 hrs
Consult Factory
2.4 oz
Notes
1 For negative logic, add suffix “N” to model number.
MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
Units are water-washable and fully compatible with commercial spray or
immersion post wave-solder washing equipment.
C-76

PagesPages 3
Télécharger [ HAD030ZGE-A ]


Fiche technique recommandé

No Description détaillée Fabricant
HAD030ZGE-A DUAL OUTPUT/ 30 WATT Power-One
Power-One

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche