|
|
Número de pieza | IDTQS3VH251 | |
Descripción | QUICKSWITCH PRODUCTS 2.5V / 3.3V 8:1 MUX/DEMUX HIGH BANDWIDTH BUS SWITCH | |
Fabricantes | IDT | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de IDTQS3VH251 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! www.DataSheet4U.com
IDTQS3VH251
2.5V / 3.3V QUAD 8:1 MUX/DEMUX HIGH BANDWIDTH BUS SWITCH
INDUSTRIALTEMPERATURERANGE
QUICKSWITCH® PRODUCTS 2.5V
/ 3.3V 8:1 MUX/DEMUX HIGH
BANDWIDTH BUS SWITCH
IDTQS3VH251
FEATURES:
• N channel FET switches with no parasitic diode to VCC
– Isolation under power-off conditions
– No DC path to VCC or GND
– 5V tolerant in OFF and ON state
• 5V tolerant I/Os
• Low RON - 4Ω typical
• Flat RON characteristics over operating range
• Rail-to-rail switching 0 - 5V
• Bidirectional dataflow with near-zero delay: no added ground
bounce
• Excellent RON matching between channels
• VCC operation: 2.3V to 3.6V
• High bandwidth - up to 500MHz
• LVTTL-compatible control Inputs
• Undershoot Clamp Diodes on all switch and control Inputs
• Low Demux capacitance, 4pF typical
• Available in QSOP and TSSOP packages
APPLICATIONS:
• Hot-swapping
• Multiplexing/demultiplexing
• Low distortion analog switch
• Replaces mechanical relay
• ATM 25/155 switching
FUNCTIONAL BLOCK DIAGRAM
S0
S1
S2
E
DESCRIPTION:
The QS3VH251 HotSwitch Quad 2:1 multiplexer/demultiplexer is a high
bandwidth bus switch. The QS3VH251 has very low ON resistance, resulting
in under 250ps propagation delay through the switch. The Select (Sx) input
controlsthedataflow. Themultiplexers/demultiplexersareenabledwhenthe
Enable(E)inputislow. IntheONstate,theswitchescanpasssignalsupto5V.
In the OFF state, the switches offer very high impedence at the terminals.
The combination of near-zero propagation delay, high OFF impedance, and
over-voltage tolerance makes the QS3VH251 ideal for high performance
comminucationapplications.
The QS3VH251 is characterized for operation from -40°C to +85°C.
Y
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
INDUSTRIAL TEMPERATURE RANGE
c 2002 Integrated Device Technology, Inc.
1
I0
I1
I2
I3
I4
I5
I6
I7
AUGUST 2002
DSC-5944/7
1 page IDTQS3VH251
2.5V / 3.3V QUAD 8:1 MUX/DEMUX HIGH BANDWIDTH BUS SWITCH
INDUSTRIALTEMPERATURERANGE
SWITCHING CHARACTERISTICS OVER OPERATING RANGE
TA = -40°C to +85°C
VCC = 2.5 ± 0.2V (1)
VCC = 3.3 ± 0.3V (1)
Symbol
tPLH
tPHL
tSEL
Parameter
Data Propagation Delay(2,3)
Y to Ix or Ix to Y
Select Time
Sx to Y
Min. (4)
⎯
1.5
Max. Min. (4)
0.2 ⎯
9 1.5
Max.
0.2
8
tPZH EnableTime
tPZL S to Ix
1.5
9 1.5
9
tPHZ DisableTime
tPLZ S to Ix
tPZH EnableTime
tPZL E to Y or Ix
tPHZ DisableTime
tPLZ E to Y or Ix
1.5
8 1.5
8
1.5
9 1.5
8
1.5
8 1.5
8
fEorSx
Operating Frequency - Enable(2,5)
⎯
10 ⎯
20
Unit
ns
ns
ns
ns
ns
ns
MHz
NOTES:
1. See Test Conditions under TEST CIRCUITS AND WAVEFORMS.
2. This parameter is guaranteed but not production tested.
3. The bus switch contributes no propagation delay other than the RC delay of the ON resistance of the switch and the load capacitance. The time constant for the switch alone
is of the order of 0.2ns at CL = 50pF. Since this time constant is much smaller than the rise and fall times of typical driving signals, it adds very little propagation delay to the
system. Propagation delay of the bus switch, when used in a system, is determined by the driving circuit on the driving side of the switch and its interaction with the load on
the driven side.
4. Minimums are guaranteed but not production tested.
5. Maximum toggle frequency for Sx or E control input (pass voltage > VCC, VIN = 5V, RLOAD ≥ 1MΩ, no CLOAD).
5
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet IDTQS3VH251.PDF ] |
Número de pieza | Descripción | Fabricantes |
IDTQS3VH251 | QUICKSWITCH PRODUCTS 2.5V / 3.3V 8:1 MUX/DEMUX HIGH BANDWIDTH BUS SWITCH | IDT |
IDTQS3VH253 | 2.5V / 3.3V DUAL 4:1 MUX/DEMUX HIGH BANDWIDTH BUS SWITCH | Integrated Device Technology |
IDTQS3VH257 | QUICKSWITCH PRODUCTS 2.5V/3.3V QUAD 2:1 MUX/DEMUX HIGH BAND WIDTH BUS SWITCH | Integrated Device |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |