|
|
PDF HMC1042L Data sheet ( Hoja de datos )
| Número de pieza | HMC1042L | |
| Descripción | 2-Axis Magnetic Sensor | |
| Fabricantes | Honeywell | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC1042L (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
2-Axis Magnetic Sensor
HMC1042L
The Honeywell HMC1042L is a high-performance, two-axis
magneto-resistive sensor. It is designed for magnetic compass
applications with capability of 0.2 degree accuracy. Stand alone or
by adding the companion HMC1041Z sensor, precision two and
three-axis magnetometry or compassing solutions are enabled. Pin
compatible with the HMC1052L; this miniature, low cost solution is
easy to assemble for high volume, cost effective OEM designs.
Applications for the HMC1042L include Compassing, Navigation
Systems, Magnetometry, and Magnetic Anomaly Detection.
The HMC1042L utilizes Honeywell’s Anisotropic Magnetoresistive
(AMR) technology that provides advantages over coil based
magnetic sensors. They are extremely sensitive, low field, low hysteresis, solid-state magnetic sensors designed to
measure direction and magnitude of Earth’s magnetic fields, from tens of micro-gauss to 6 gauss. Honeywell’s Magnetic
Sensors are among the most sensitive and reliable low-field sensors in the industry.
Honeywell continues to maintain product excellence and performance by introducing innovative solid-state magnetic
sensor solutions. These are highly reliable, top performance products that are delivered when promised. Honeywell’s
magnetic sensor solutions provide real solutions you can count on.
FEATURES
4 Two-Axis Precision Sensors
4 Miniature Surface Mount Two-Axis
Magnetic Sensors (3mm x 3mm QFN)
4 Low Voltage Operations (1.8V)
4 Low Cost
4 Available in Tape & Reel Packaging
4 Lead Free Package Construction
4 4-Element Wheatstone Bridge
4 Wide Magnetic Field Range (+/-6 Oe)
4 Patented Offset and Set/Reset Straps
BENEFITS
4
Near-Perfect Orthogonality
Performance
and
±0.2%FS/gauss
Cross
Axis
4 Small Size for Low Profile Sensing Applications and Mounting,
Compatible with High Speed SMT Assembly
4 Compatible for Battery Powered Applications
4 Designed for High Volume, Cost Effective OEM Designs
4 High Volume OEM Assembly
4 Complies with Current Environmental Standards
4 Low Noise Passive Element Design
4 Sensor Can Be Used in Strong Magnetic Field Environments
4 Stray Magnetic Field Compensation
1 page  
HMC1042L
Stencil Design and Solder Paste
A 4 mil stencil and 100% paste coverage is recommended for the electrical contact pads. The HMC1042L has been
tested successfully with no-clean solder paste.
BASIC DEVICE OPERATION
The Honeywell HMC1042L magnetoresistive sensors are Wheatstone bridge devices to measure magnetic fields. With
power supply applied to the bridges, the sensors convert any incident magnetic field in the sensitive axis directions to a
differential voltage output. In addition to the bridge circuit, the sensor has two on-chip magnetically coupled straps; the
offset strap and the set/reset strap. These straps are Honeywell patented features for incident field adjustment and
magnetic domain alignment; and eliminate the need for external coils positioned around the sensors. The straps are
common in effect to both bridges.
The magnetoresistive sensors are made of a nickel-iron (Permalloy) thin-film deposited on a silicon wafer and patterned
as a resistive strip element. In the presence of a magnetic field, a change in the bridge resistive elements causes a
corresponding change in voltage across the bridge outputs.
These resistive elements are aligned together to have a common sensitive axis (indicated by arrows on the pinouts) that
will provide positive voltage change with magnetic fields increasing in the sensitive direction. Because the output only is in
proportion to the one-dimensional axis (the principle of anisotropy) and its magnitude, additional sensor bridges placed at
orthogonal directions permit accurate measurement of arbitrary field direction. The combination of sensor bridges in two
and three orthogonal axis permit applications such as compassing and magnetometry.
The offset strap allows for several modes of operation when a direct current is driven through it. These modes are: 1)
Subtraction (bucking) of an unwanted external magnetic field, 2) null-ing of the bridge offset voltage, 3) Closed loop field
cancellation, and 4) Auto-calibration of bridge gain.
The set/reset strap can be pulsed with high currents for the following benefits: 1) Enable the sensor to perform high
sensitivity measurements, 2) Flip the polarity of the bridge output voltage, and 3) Periodically used to improve linearity,
lower cross-axis effects, and temperature effects.
Offset Strap
The offset strap is a spiral of metallization that couples in the sensor element’s sensitive axis. The offset strap measures
nominally 15 ohms, and requires 10mA for each gauss of induced field. The straps will easily handle currents to buck or
boost fields through the ±6 gauss linear measurement range, but designers should note the extreme thermal heating on
the die when doing so.
With most applications, the offset strap is not utilized and can be ignored. Designers can leave one or both strap
connections (Off- and Off+) open circuited, or ground one connection node. Do not tie both strap connections together to
avoid shorted turn magnetic circuits.
Set/Reset Strap
The set/reset strap is another spiral of metallization that couples to the sensor elements easy axis (perpendicular to the
sensitive axis on the sensor die. Each set/reset strap has a nominal resistance of 4.5 ohms with a nominal required peak
current of 500mA for reset or set pulses. With rare exception, the set/reset strap must be used to periodically condition the
magnetic domains of the magneto-resistive elements for best and reliable performance.
A set pulse is defined as a positive pulse current entering the S/R+ strap connection. The successful result would be the
magnetic domains aligned in a forward easy-axis direction so that the sensor bridge’s polarity is a positive slope with
positive fields on the sensitive axis result in positive voltages across the bridge output connections.
A reset pulse is defined as a negative pulse current entering the S/R+ strap connection. The successful result would be
the magnetic domains aligned in a reverse easy-axis direction so that bridge’s polarity is a negative slope with positive
fields on the sensitive axis result in negative voltages across the bridge output connections.
Typically a reset pulse is sent first, followed by a set pulse a few milliseconds later. By shoving the magnetic domains in
completely opposite directions, any prior magnetic disturbances are likely to be completely erased by the duet of pulses.
For simpler circuits with less critical requirements for noise and accuracy, a single polarity pulse circuit may be employed
www.honeywell.com
5
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC1042L.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC1042L | 2-Axis Magnetic Sensor | Honeywell |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |