|
|
PDF HMC215LP4 Data sheet ( Hoja de datos )
| Número de pieza | HMC215LP4 | |
| Descripción | GaAs MMIC Mixer | |
| Fabricantes | Hittite Microwave | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC215LP4 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
v00.0906
Typical Applications
The HMC215LP4 / HMC215LP4E is ideal for
Wireless Infrastructure Applications:
• PCS / 3G Infrastructure
• Base Stations & Repeaters
• WiMAX & WiBro
8 • ISM & Fixed Wireless
Functional Diagram
HMC215LP4 / 215LP4E
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 1.7 - 4.0 GHz
Features
Input IP3: +25 dBm
Low Input LO Drive: +2 to +6 dBm
High LO to RF Isolation: 32 dB
Low Conversion Loss: 8 dB
Single Positive Supply: +5V @ 56 mA
RoHS Compliant 4x4 mm QFN Package
General Description
The HMC215LP4 & HMC215LP4E are high linearity,
double-balanced converter ICs that operate from
1.7 to 4.0 GHz and deliver a +25 dBm input third
order intercept point. The LO amplifier output and
high dynamic range mixer input are positioned so
that an external LO filter can be placed in series be-
tween them. The converter provides 32 dB of LO to
RF isolation and is ideal for upconverter and down-
converter applications. The IC operates from a single
+5V supply consuming 56 mA of current and accepts
a LO drive level of 2 to 6 dBm. The design requires no
external baluns and supports IF frequencies between
DC and 1 GHz. The HMC215LP4(E) is pin for pin
compatible with the HMC552LP4(E), which operates
from 1.6 to 3.0 GHz.
Electrical Specifications, TA = +25°C, LO = +4 dBm, Vcc = +5V, IF = 100 MHz*
Parameter
Min.
Typ. Max.
Units
Frequency Range, RF, LO
1.7 - 4.0
GHz
Frequency Range, IF
DC - 1.0
GHz
Conversion Loss
8.0 11
dB
Noise Figure (SSB)
8.5 dB
LO to RF Isolation
23 32
dB
LO to IF Isolation
10 20
dB
IP3 (Input)
25 dBm
1 dB Compression (Input)
17 dBm
LO Drive Input Level (Typical)
2 to 6
dBm
Supply Current (Icc)
56 70
mA
*Unless otherwise noted, all measurements performed as a downconverter, with low side LO and configured as shown in application circuit.
8 - 78
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page  
www.DataSheet4U.com
v00.0906
8
Absolute Maximum Ratings
RF / IF Input (Vcc= +5V)
LO Drive (Vcc= +5V)
BIAS
Junction Temperature
Continuous Pdiss (T = 85°C)
(derate 5.21 mW/°C above 85°C)
Thermal Resistance
(junction to ground paddle)
Storage Temperature
Operating Temperature
+22 dBm
+10 dBm
+7 Vdc
150°C
0.339 W
192 °C/W
-65 to +150°C
-40 to +85°C
Outline Drawing
HMC215LP4 / 215LP4E
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 1.7 - 4.0 GHz
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
8 - 82
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
HMC215LP4
Package Body Material
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC215LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 [1]
MSL1 [2]
Package Marking [3]
H215
XXXX
H215
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet HMC215LP4.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC215LP4 | GaAs MMIC Mixer | Hittite Microwave |
| HMC215LP4E | GaAs MMIC Mixer | Hittite Microwave |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |