DataSheetWiki


HA4P2425-5 fiches techniques PDF

Intersil Corporation - 3.2s Sample and Hold Amplifiers

Numéro de référence HA4P2425-5
Description 3.2s Sample and Hold Amplifiers
Fabricant Intersil Corporation 
Logo Intersil Corporation 





1 Page

No Preview Available !





HA4P2425-5 fiche technique
HA-2420, HA-2425
November 1996
3.2µs Sample and Hold Amplifiers
Features
• Maximum Acquisition Time
- 10V Step to 0.1%. . . . . . . . . . . . . . . . . . . . . 4µs (Max)
- 10V Step to 0.01%. . . . . . . . . . . . . . . . . . . . 6µs (Max)
• Low Droop Rate (CH = 1000pF). . . . . . . . 5µV/ms (Typ)
• Gain Bandwidth Product . . . . . . . . . . . . . 2.5MHz (Typ)
• Low Effective Aperture Delay Time . . . . . . . 30ns (Typ)
• TTL Compatible Control Input
±12V to ±15V Operation
Applications
• 12-Bit Data Acquisition
• Digital to Analog Deglitcher
• Auto Zero Systems
• Peak Detector
• Gated Operational Amplifier
Ordering Information
PART NUMBER
HA1-2420-2
HA1-2425-5
HA3-2425-5
HA4P2425-5
HA9P2425-5
TEMP.
RANGE (oC)
PACKAGE
-55 to 125 14 Ld CERDIP
0 to 75 14 Ld CERDIP
0 to 75 14 Ld PDIP
0 to 75 20 Ld PLCC
0 to 75 14 Ld SOIC
PKG.
NO.
F14.3
F14.3
E14.3
N20.35
M14.15
Description
The HA-2420 and HA-2425 is a monolithic circuit consisting
of a high performance operational amplifier with its output in
series with an ultra-low leakage analog switch and JFET
input unity gain amplifier.
With an external hold capacitor connected to the switch output,
a versatile, high performance sample-and-hold or track-and-
hold circuit is formed. When the switch is closed, the device
behaves as an operational amplifier, and any of the standard op
amp feedback networks may be connected around the device
to control gain, frequency response, etc. When the switch is
opened the output will remain at its last level.
Performance as a sample-and-hold compares very favorably
with other monolithic, hybrid, modular, and discrete circuits.
Accuracy to better than 0.01% is achievable over the
temperature range. Fast acquisition is coupled with superior
droop characteristics, even at high temperatures. High slew
rate, wide bandwidth, and low acquisition time produce
excellent dynamic characteristics. The ability to operate at
gains greater than 1 frequently eliminates the need for
external scaling amplifiers.
The device may also be used as a versatile operational
amplifier with a gated output for applications such as analog
switches, peak holding circuits, etc. For more information,
please see Application Note AN517.
The MIL-STD-883 data sheet for this device is available on
request.
Pinouts
HA-2420 (CERDIP)
HA-2425 (CERDIP, PDIP, SOIC)
TOP VIEW
-IN 1
+IN 2
OFFSET ADJ. 3
OFFSET ADJ. 4
V- 5
NC 6
OUTPUT 7
14 S/H CONTROL
13 GND
12 NC
11 HOLD CAP.
10 NC
9 V+
8 NC
HA-2425
(PLCC)
TOP VIEW
3 2 1 20 19
OFFSET ADJ. 4
NC 5
OFFSET ADJ. 6
NC 7
V- 8
18 NC
17 NC
16 HOLD CAP.
15 NC
14 NC
9 10 11 12 13
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
5-1
File Number 2856.2

PagesPages 9
Télécharger [ HA4P2425-5 ]


Fiche technique recommandé

No Description détaillée Fabricant
HA4P2425-5 3.2s Sample and Hold Amplifiers Intersil Corporation
Intersil Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche