|
|
PDF PE4239 Data sheet ( Hoja de datos )
| Número de pieza | PE4239 | |
| Descripción | SPDT UltraCMOS RF Switch | |
| Fabricantes | Peregrine Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PE4239 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Product Description
The PE4239 UltraCMOS™ RF Switch is designed to cover a
broad range of applications from DC through 3.0 GHz. This
reflective switch integrates on-board CMOS control logic with a
low voltage CMOS-compatible control interface, and can be
controlled using either single-pin or complementary control
inputs. Using a nominal +3-volt power supply voltage, a typical
input 1 dB compression point of +27 dBm can be achieved.
The PE4239 UltraCMOS™ RF Switch is manufactured in
Peregrine’s patented Ultra Thin Silicon (UTSi®) CMOS
process, offering the performance of GaAs with the economy
and integration of conventional CMOS.
Figure 1. Functional Diagram
RFCommon
RF1 RF2
Product Specification
PE4239
SPDT UltraCMOS™ RF Switch
Features
• Single-pin or complementary CMOS
logic control inputs
• +3.0-volt power supply needed for
single-pin control mode
• Low insertion loss: 0.7 dB at 1.0 GHz,
0.9 dB at 2.0 GHz
• Isolation of 32 dB at 1.0 GHz, 23 dB at
2.0 GHz
• Typical input 1 dB compression point of
+27 dBm
• Ultra-small SC-70 package
Figure 2. Package Type SC-70
6-lead SC-70
CMOS
Control
Driver
CTRL CTRL or VDD
Table 1. Electrical Specifications @ +25 °C, VDD = 3 V (ZS = ZL = 50 Ω)
Parameter
Conditions
Minimum
Typical
Maximum
Units
Operation Frequency1
Insertion Loss
Isolation
Return Loss
‘ON’ Switching Time
1000 MHz
2000 MHz
1000 MHz
2000 MHz
1000 MHz
2000 MHz
50% CTRL to 0.1 dB of final value, 1 GHz
DC
30
21
18
16
3000
MHz
0.7 0.85 dB
0.9 1.05 dB
32 dB
23 dB
20 dB
18 dB
300 ns
‘OFF’ Switching Time
50% CTRL to 25 dB isolation, 1 GHz
200 ns
Video Feedthrough2
15 mVpp
Input 1 dB Compression
2000 MHz
26 27
dBm
Input IP3
2000 MHz, 14 dBm input power
43 45
dBm
Notes: 1. Device linearity will begin to degrade below 10 MHz.
2. The DC transient at the output of any port of the switch when the control voltage is switched from Low to High or High to Low in a 50 Ω test
set-up, measured with 1ns risetime pulses and 500 MHz bandwidth.
Document No. 70-0068-01 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 8
1 page  
PE4239
Product Specification
Typical Performance Data @ -40 °C to 85 °C (Unless otherwise noted)
Figure 6. Insertion Loss – RFC to RF1
0
-0.3
-40°C
-0.6
-0.9 85°C 25°C
-1.2
-1.5
0
500
1000
1500
2000
2500
3000
Frequency (MHz)
Figure 7. Input 1 dB Compression Point & IIP3
(Typical performance @ 25 °C)
60 60
50 50
40 40
30 30
20
0
20
500
1000
1500
2000
2500
3000
Frequency (MHz)
Figure 8. Insertion Loss – RFC to RF2
0
-0.3
-40°C
-0.6
-0.9 85°C 25°C
-1.2
-1.5
0
500
1000
1500
2000
2500
3000
Frequency (MHz)
Figure 9. Isolation – RFC to RF1
0
-20
-40
-60
-80
-100
0
500
1000
1500
2000
2500
3000
Frequency (MHz)
Document No. 70-0068-01 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 5 of 8
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet PE4239.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PE4230 | SPDT High Power UltraCMOS RF Switch | Peregrine Semiconductor |
| PE4231 | SPDT High Power UltraCMOS | Peregrine Semiconductor |
| PE4232 | SPST CATV UltraCMOS Switch | Peregrine Semiconductor |
| PE423422 | SPDT RF Switch | Peregrine Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |