|
|
PDF S70GL01GN00 Data sheet ( Hoja de datos )
| Número de pieza | S70GL01GN00 | |
| Descripción | Page Mode Flash Memory | |
| Fabricantes | SPANSION | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de S70GL01GN00 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
S70GL01GN00 MirrorBit™ Flash
1024 Megabit,
3.0 Volt-only Page Mode Flash Memory Featuring
110 nm MirrorBit™ Process Technology
Data Sheet
ADVANCE
INFORMATION
Notice to Readers: The Advance Information status indicates that this
document contains information on one or more products under development
at Spansion LLC. The information is intended to help you evaluate this product.
Do not design in this product without contacting the factory. Spansion LLC
reserves the right to change or discontinue work on this proposed product
without notice.
Publication Number S70GL01GN00_00 Revision A Amendment 1 Issue Date June 1, 2005
1 page  
Advance Information
The device reduces power consumption in the standby mode when it detects
specific voltage levels on CE# and RESET#, or when addresses are stable for a
specified period of time.
The Secured Silicon Sector provides a 128-word/256-byte area for code or
data that can be permanently protected. Once this sector is protected, no further
changes within the sector can occur.
The Write Protect (WP#/ACC) feature protects the first or last sector by as-
serting a logic low on the WP# pin.
MirrorBit flash technology combines years of Flash memory manufacturing expe-
rience to produce the highest levels of quality, reliability and cost effectiveness.
The device electrically erases all bits within a sector simultaneously via hot-hole
assisted erase. The data is programmed using hot electron injection.
June 1, 2005 S70GL01GN00_00_A1
S70GL01GN00 MirrorBitTM Flash
3
5 Page 
Advance Information
Ordering Information
The ordering part number is formed by a valid combination of the following:
S70GL01GN00 F A I 00 0
PACKING TYPE
0 = Tray (standard; see note 1)
2 = 7” Tape and Reel
3 = 13” Tape and Reel
MODEL NUMBER (VIO range, protection when WP# =VIL)
01 = VIO = VCC = 2.7 to 3.6 V, highest address sector protected for both Flash-1
and Flash-2
02 = VIO = VCC = 2.7 to 3.6 V, lowest address sector protected for both Flash-1
and Flash-2
12 = VIO = VCC = 2.7 to 3.6 V, highest address sector protected for Flash1, lowest
address sector protected for Flash-2
TEMPERATURE RANGE
I = Industrial (–40°C to +85°C)
PACKAGE MATERIALS SET
A = Standard
F = Pb-free
PACKAGE TYPE
F = Fortified Ball Grid Array, 1.0 mm pitch package
DEVICE NUMBER/DESCRIPTION
3.0 Volt-only, 1024 Megabit (2x32 M x 16-Bit/2x64 M x 8-Bit) Page-Mode Flash Memory
Manufactured on 110 nm MirrorBitTM process technology
S70GL01GN00 Valid Ordering Part Numbers
1Gb
Package &
Temperature
Model
Number
Pack Type
(Note 1)
Comments
S70GL01GN00
FAI, FFI (Note 2)
01, 02, 12
0, 2, 3
Speed = 110 ns
Notes:
1. Type 0 is standard. Specify other options as required.BGAs can be packed in Types 0, 2, or 3.
2. BGA package Note 2marking omits leading S29 and packing type designator from ordering part number.
Valid Combinations
Valid Combinations list configurations planned to be supported in volume for this device.
Consult your local sales office to confirm availability of specific valid combinations and to
check on newly released combinations.
June 1, 2005 S70GL01GN00_00_A1
S70GL01GN00 MirrorBitTM Flash
9
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet S70GL01GN00.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| S70GL01GN00 | Page Mode Flash Memory | SPANSION |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |