DataSheetWiki


MADCSM0012 fiches techniques PDF

Tyco Electronics - PCS LNA / Downconverter

Numéro de référence MADCSM0012
Description PCS LNA / Downconverter
Fabricant Tyco Electronics 
Logo Tyco Electronics 





1 Page

No Preview Available !





MADCSM0012 fiche technique
www.DataSheet4U.com
PCS LNA/Downconverter
1800-2000 MHz
Features
Highly Integrated LNA and Downconverter
3mm 16-Lead PQFN
Operates over 2.7 V to 5 V Supply Voltage
Low Noise Figure: 2.3 dB Typical
High Input Intercept Point: -9 dBm Typical
Continuous Current Control Downconverter
Low LO Drive Level: -10 dBm
Description
M/A-COM’s MADCSM0012 integrated
downconverter combines a low noise amplifier, a RF
amplifier, a downconverting mixer, an IF amplifier,
and LO buffer amplifier. The MADCSM0012 is
packaged in a low cost 3mm 16-Lead PQFN with an
exposed pad for improved high frequency
grounding.
M/A-COM designed the MADCSM0012 for handsets
requiring wide dynamic range and low power
consumption. By application of a suitable control
voltage to pin 6, the linearity of the device can be
controlled in real time to keep the current as low as
possible
The MADCSM0012 is fabricated using M/A-COM’s
0.5-micron low noise E/D GaAs MESFET process.
The process features full passivation for increased
performance and reliability.
Ordering Information1
Part Number
Package
MADCSM0012
Bulk Packaging
MADCSM0012TR
Tape and Reel (1K Reel)
MADCSM0012SMB
Sample Test Board
1. Reference Application Note M513 for reel size information.
Absolute Maximum Ratings 2,3
Parameter
Absolute Maximum
Voltage
6V
Input Power
0 dBm
Operating Temperature
-30°C to +85°C
Storage Temperature
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
1 these survivability limits.
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
MADCSM0012
V2
Functional Block Diagram
Pin Configuration
Pin No. Pin Name
Description
1
LNA IN
Input to LNA; RF matching required
2 GND
DC and RF Ground
Source of LNA output stage FET.
3 LNA SRC RF bypassing required. Off-chip resis-
tor may be used to increase IIP3
4
LNA OUT
50 Ohm LNA output; DC Blocked
5
LNA VDD2
LNA second stage supply voltage;
RF bypassing required
6 VCTL
Downconverter bias control.
0 to 3.0 V allowed
7 GND
DC and RF Ground
8 RFA VDD
RFA supply voltage;
RF bypassing required
9 GND
DC and RF Ground
10 RFA IN 50 Ohm RFA Input; DC Blocked
11 LOA VDD
LOA supply voltage;
RF bypassing required
12 GND
DC and RF Ground
13 LOA IN Local oscillator input (-10 to –5 dBm)
14 IF OUT
IF Output of downconverter;
IF matching required
15
IFA MATCH
IF matching between mixer and IFA;
required an inductor to ground
16 LNA VDD1
LNA first stage supply voltage;
RF bypassing required
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.

PagesPages 6
Télécharger [ MADCSM0012 ]


Fiche technique recommandé

No Description détaillée Fabricant
MADCSM0011 Dual Mode Cellular Downconverter Tyco Electronics
Tyco Electronics
MADCSM0012 PCS LNA / Downconverter Tyco Electronics
Tyco Electronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche