|
|
PDF MAAPGM0064-DIE Data sheet ( Hoja de datos )
| Número de pieza | MAAPGM0064-DIE | |
| Descripción | Power Amplifier | |
| Fabricantes | Tyco Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MAAPGM0064-DIE (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
RoHS
Compliant
Amplifier, Power, 2.0 W
6.5—9.5 GHz
Features
♦ 2 Watt Saturated Output Power Level
♦ Variable Drain Voltage (4-10V) Operation
♦ MSAG™ Process
♦ High Performance Ceramic Bolt Down Package
MAAPGM0064-DIE
Rev —
Preliminary Information
Description
The MAAPGM0064-DIE is a 2-stage 2 W power amplifier with on-chip
bias networks. This product is fully matched to 50 ohms on both the
input and output. It can be used as a power amplifier stage or as a
driver stage in high power applications.
Each device is 100% RF tested to ensure performance compliance.
The part is fabricated using M/A-COM’s GaAs Multifunction Self-
Aligned Gate Process.
M/A-COM’s MSAG™ process features robust silicon-like
manufacturing processes, planar processing of ion implanted
transistors and multiple implant capability enabling power, low-noise,
switch and digital FETs on a single chip. The use of refractory metals
and the absence of platinum in the gate metal formulation prevents
hydrogen poisoning when employed in hermetic packaging.
Primary Applications
♦ Multiple Band Point-to-Point Radio
♦ SatCom
♦ ISM Band
Also Available in:
SAMPLES
Description
Ceramic Package
Sample Board (Die)
Mechanical Sample (Die)
Part Number
MAAPGM0064
MAAP-000064-SMB004
Not Available
Electrical Characteristics: TB = 40°C1, Z0 = 50 Ω, VDD = 8V, IDQ ≈ 600 mA2, Pin = 18 dBm, RG ≈ 120Ω
Parameter
Symbol
Typical
Units
Bandwidth
f 6.5-9.5
GHz
Output Power
POUT
34.5
dBm
Power Added Efficiency
PAE
30
%
1-dB Compression Point
P1dB
32
dBm
Small Signal Gain
G
20
dB
Input VSWR
VSWR
Output VSWR
VSWR
Gate Supply Current
Drain Supply Current
Noise Figure
IGG
IDD
NF
2nd Harmonic
2f
3rd Harmonic
3f
Output Third Order Intercept
OTOI
3rd Order Intermodulation Distortion,
Single Carrier Level = 20 dBm
IM3
5th Order Intermodulation Distortion,
Single Carrier Level = 20 dBm
IM5
1. TB = MMIC Base Temperature
1 2. Adjust VGG between –2.6 and –1.2V to achieve specified Idq.
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
1.8:1
3.0:1
<5
<1
9.5
-20
-45
41
-10
-25
mA
mA
dB
dBc
dBc
dBm
dBm
dBm
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
1 page  
RoHS
Compliant
Amplifier, Power, 2.0 W
6.5—9.5 GHz
Assembly and Bonding Diagram
0.01-0.1 μF
100-
200
pF
100-
200
pF
MAAPGM0064-DIE
Rev —
Preliminary Information
0.01-0.1 μF
VDD
RFIN
RFOUT
VGG
40 Ω
0.01-0.1 μF
100-
200
pF
100-
200
pF
0.01-0.1 μF
Figure 4. Recommended operational configuration. Wire bond as shown.
Die Handling:
Refer to Application Note AN3016.
Assembly Instructions:
Die Attach: Use AuSn (80/20) 1 mil. preform solder. Limit time @ 310 °C to less than
7 minutes. Refer to Application Note AN3017 for more detailed information.
Wirebonding: Bond @ 160 °C using standard ball or thermal compression wedge
bond techniques. For DC pad connections, use either ball or wedge bonds. For best
RF performance, use wedge bonds of shortest length, although ball bonds are also
acceptable.
Biasing Note: Must apply negative bias to VGG before applying positive bias to VDD to prevent
damage to amplifier.
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet MAAPGM0064-DIE.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MAAPGM0064-DIE | Power Amplifier | Tyco Electronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |