|
|
PDF MAAPGM0064 Data sheet ( Hoja de datos )
| Número de pieza | MAAPGM0064 | |
| Descripción | Power Amplifier | |
| Fabricantes | Tyco Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MAAPGM0064 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Amplifier, Power, 2.0 W
6.5—9.5 GHz
Features
♦ 2 Watt Saturated Output Power Level
♦ Variable Drain Voltage (4-10V) Operation
♦ MSAG™ Process
♦ High Performance Ceramic Bolt Down Package
Primary Applications
♦ Multiple Band Point-to-Point Radio
♦ SatCom
♦ ISM Band
MAAPGM0064
903261 —
Preliminary Information
APGM0064
YWWXXX
Description
The MAAPGM0064 is a 2-stage 2 W power amplifier with on-chip
bias networks in a bolt down ceramic package, allowing easy
assembly. This product is fully matched to 50 ohms on both the input
and output. It can be used as a power amplifier stage or as a driver
stage in high power applications.
Each device is 100% RF tested to ensure performance compliance.
The part is fabricated using M/A-COM’s GaAs Multifunction Self-
Aligned Gate Process.
M/A-COM’s MSAG™ process features robust silicon-like
manufacturing processes, planar processing of ion implanted
transistors and multiple implant capability enabling power, low-noise,
switch and digital FETs on a single chip. The use of refractory metals
and the absence of platinum in the gate metal formulation prevents
hydrogen poisoning when employed in hermetic packaging.
Maximum Operating Conditions 1
Parameter
Symbol
Input Power
Drain Supply Voltage
Gate Supply Voltage
Quiescent Drain Current (No RF, 40% Idss)
Quiescent DC Power Dissipated (No RF)
PIN
VDD
VGG
IDQ
PDISS
Junction Temperature
Storage Temperature
TJ
TSTG
1. Operation outside of these ranges may reduce product reliability.
Absolute Maximum
23.0
+12.0
-3.0
950
7.9
180
-55 to +150
Pin Number
1
2
3
4
5
6
7
8
9
10
RF Designator
No Connection
VGG
RF IN
VGG
No Connection
No Connection
VDD
RF OUT
VDD
No Connection
Units
dBm
V
V
mA
W
°C
°C
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
1 page  
Amplifier, Power, 2.0 W
6.5—9.5 GHz
V GG
0.1 μF
100 pF
RF IN
MAAPGM0064
903261 —
Preliminary Information
100 pF
RF OUT
0.1 μF
V DD
100 pF
100 pF
Figure 8. Recommended Bias Configuration
Assembly Instructions:
Pin Number
1
2
3
4
5
6
7
8
9
10
RF Designator
No Connection
VGG
RF IN
VGG
No Connection
No Connection
VDD
RF OUT
VDD
No Connection
This flange mount style package provides a robust interface between a highly integrated GaAs MMIC device and a circuit board
which may be assembled using conventional surface mount techniques. A thin shim made of a thermally and electrically
conductive, ductile material should be used prior to installation of the CR-15 to improve the thermal and electrical performance of
the package to housing interface. Refer to M/A-COM Application Note #M567* for more information .
For applications where surface mount components are to be installed after the CR-15 installation, this package will not be
damaged when subjected to typical convection or IR oven reflow profiles. Refer to M/A-COM Application Note #M538* for
maximum allowable reflow time and temperature. Alternatively, the package leads may be individually soldered. Whether an iron
or hot gas soldering equipment is used, care should be taken to insure that the temperature is well controlled and electric static
discharge (ESD) safe.
* Application Notes can be found by going to the Site Search Page on M/A-COM’s web page
(http://www.macom.com/search/search.jsp) and searching for the required Application Note.
Biasing Notes:
♦ The 100pF bypass capacitors must be placed as close to the VGG and VDD pins as possible
(recommended < 100 mils).
♦ A negative bias must be applied to VGG before applying a positive bias to VDD to prevent damage to the amplifier.
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet MAAPGM0064.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MAAPGM0060 | Power Amplifier | Tyco Electronics |
| MAAPGM0060-DIE | Amplifier | Tyco Electronics |
| MAAPGM0062-DIE | Amplifier | Tyco Electronics |
| MAAPGM0063-DIE | Amplifier | Tyco Electronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |