|
|
PDF MAAPGM0035S-DIE Data sheet ( Hoja de datos )
| Número de pieza | MAAPGM0035S-DIE | |
| Descripción | Power Amplifier | |
| Fabricantes | Tyco Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MAAPGM0035S-DIE (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Amplifier, Power, S/C-Band, 1.6W
2.5-5.5 GHz
Features
♦ 1.6 Watt Saturated Output Power Level
♦ Variable Drain Voltage (4-10V) Operation
♦ MSAG Process
♦ On-Chip Bias Ladder
Description
The MAAPGM0035S-DIE is a 2-stage, 1.6 W power amplifier with on-
chip bias networks. This product is fully matched to
50 ohms on both the input and output. It can be used as a power ampli-
fier stage or as a driver stage in high power applications. An on-chip
bias ladder allows for fixed gate voltage or fixed small-signal drain cur-
rent operation.
Each device is 100% RF tested on wafer to ensure performance
compliance. The part is fabricated using M/A-COM’s repeatable, high
performance and highly reliable GaAs Multifunction Self-Aligned Gate
(MSAG®) Process. This process provides polyimide scratch protection.
MAAPGM0035S-DIE
903179 —
Preliminary Information
Primary Applications
♦ WLL
♦ MMDS
♦ SatCom
Electrical Characteristics: TB = 40°C1, Z0 = 50 Ω, VDD = 8V, Idq= 600mA2, Pin = 20 dBm
Parameter
Bandwidth
Symbol
f
Typical
2.5-5.5
Units
GHz
Output Power
Power Added Efficiency
1-dB Compression Point
Small Signal Gain
Input VSWR
POUT
PAE
P1dB
G
VSWR
32
34
31
17
1.5:1
dBm
%
dBm
dB
Gate Current
Drain Current
Output Third Order Intercept
IGG
IDD
OTOI
< 10
< 850
42
mA
mA
dBm
Noise Figure
2nd Harmonic
3rd Harmonic
NF 7 dB
2f -10 dBc
3f -20 dBc
1. TB = MMIC Base Temperature
2. Adjust VGG between –6.5 and –3.5V to achieve specified Idq.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
1 page  
Amplifier, Power, S/C-Band, 1.6W
2.5-5.5 GHz
Assembly and Bonding Diagram
100 pF
MAAPGM0035S-DIE
903179 —
Preliminary Information
0.1 μF
VDD
RFIN
RFOUT
VGG
0.1 μF
100 pF
100 pF
Dashed lines indicate
optional wiring
configuration.
Figure 4. Recommended bonding diagram for pedestal mount.
Support circuitry typical of MMIC characterization.
Assembly Instructions:
Die attach: Use AuSn (80/20) 1 mil. preform solder. Limit time @ 300 °C to less than 5 minutes.
Wirebonding: Bond @ 160 °C using standard ball or thermal compression wedge bond techniques.
For DC pad connections, use either ball or wedge bonds. For best RF performance, use wedge
bonds of shortest length, although ball bonds are also acceptable.
Biasing Note: Must apply negative bias to VGG before applying positive bias to VDD to prevent
damage to amplifier.
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet MAAPGM0035S-DIE.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MAAPGM0035S-DIE | Power Amplifier | Tyco Electronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |