DataSheetWiki


HA3-2405-5 fiches techniques PDF

Intersil Corporation - 40MHz/ PRAM Four Channel Programmable Amplifiers

Numéro de référence HA3-2405-5
Description 40MHz/ PRAM Four Channel Programmable Amplifiers
Fabricant Intersil Corporation 
Logo Intersil Corporation 





1 Page

No Preview Available !





HA3-2405-5 fiche technique
November 1996
HA-2400, HA-2404,
HA-2405
40MHz, PRAM Four Channel
Programmable Amplifiers
Features
• Programmability
• High Rate Slew . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V/µs
• Wide Gain Bandwidth . . . . . . . . . . . . . . . . . . . . . 40MHz
• High Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150kV/V
• Low Offset Current . . . . . . . . . . . . . . . . . . . . . . . . . .5nA
• High Input Impedance . . . . . . . . . . . . . . . . . . . . . . 30M
• Single Capacitor Compensation
• DTL/TTL Compatible Inputs
Applications
• Thousands of Applications; Program
- Signal Selection/Multiplexing
- Operational Amplifier Gain
- Oscillator Frequency
- Filter Characteristics
- Add-Subtract Functions
- Integrator Characteristics
- Comparator Levels
Ordering Information
PART NUMBER
HA1-2400-2
HA1-2404-4
HA1-2405-5
HA3-2405-5
TEMP.
RANGE (oC)
PACKAGE
-55 to 125 16 Ld CERDIP
-25 to 85 16 Ld CERDIP
0 to 75 16 Ld CERDIP
0 to 75 16 Ld PDIP
PKG.
NO.
F16.3
F16.3
F16.3
E16.3
Description
THA-2400/04/05 comprise a series of four-channel
programmable amplifiers providing a level of versatility
unsurpassed by any other monolithic operational amplifier.
Versatility is achieved by employing four input amplifier
channels, any one (or none) of which may be electronically
selected and connected to a single output stage through
DTL/TTL compatible address inputs. The device formed by
the output and the selected pair of inputs is an op amp which
delivers excellent slew rate, gain bandwidth and power
bandwidth performance. Other advantageous features for
these dielectrically isolated amplifiers include high voltage
gain and input impedance coupled with low input offset
voltage and offset current. External compensation is not
required on this device at closed loop gains greater than 10.
Each channel of the HA-2400/04/05 can be controlled and
operated with suitable feedback networks in any of the
standard op amp configurations. This specialization makes
these amplifiers excellent components for multiplexing signal
selection and mathematical function designs. With 30V/µs
slew rate, 40MHz gain bandwidth and 30Minput
impedance these devices are ideal building blocks for signal
generators, active filters and data acquisition designs.
Programmability, coupled with 4mV typical offset voltage and
5nA offset current, makes these amplifiers outstanding
components for signal conditioning circuits.
During Disable Mode VOUT goes to V-. For high output
impedance during Disable, see HA2444.
For further design ideas, see Application Note AN514.
Pinout
HA-2400/04 (CERDIP)
HA-2405 (CERDIP, PDIP)
TOP VIEW)
+IN3 1 +
33
-IN3 2 -
+IN4 3 +
4
-IN4 4 -
-IN1 5 -
1
+IN1 6 +
-IN2 7 -
2
+IN2 8 +
DECODE
CONTROL
16 D0
15 D1
14 ENABLE
13 GND
COMP
12
11 V+
10 OUT
OUTPUT AMP 9 V-
TRUTH TABLE
D1 D0 EN SELECTED CHANNEL D1
LLH 1 L
LHH 2 L
HLH 3 H
HHH 4 H
X X L None, VOUT goes to V- X
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
3-161
File Number 2891.2

PagesPages 7
Télécharger [ HA3-2405-5 ]


Fiche technique recommandé

No Description détaillée Fabricant
HA3-2405-5 40MHz/ PRAM Four Channel Programmable Amplifiers Intersil Corporation
Intersil Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche