DataSheet.es    


PDF UPC8231TK Data sheet ( Hoja de datos )

Número de pieza UPC8231TK
Descripción BIPOLAR ANALOG INTEGRATED CIRCUIT
Fabricantes CEL 
Logotipo CEL Logotipo



Hay una vista previa y un enlace de descarga de UPC8231TK (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! UPC8231TK Hoja de datos, Descripción, Manual

www.DataSheet4U.com
DATA SHEET
BIPOLAR ANALOG INTEGRATED CIRCUIT
MPC8231TK
SiGe:C LOW NOISE AMPLIFIER
FOR GPS/MOBILE COMMUNICATIONS
DESCRIPTION
The MPC8231TK is a silicon germanium carbon (SiGe:C) monolithic integrated circuit designed as low noise
amplifier for GPS and mobile communications. This device exhibits low noise figure and high power gain
characteristics. This device is enabled in the frequency range from 1.5 to 2.4 GHz by modifying the external matching
circuit.
The package is 6-pin lead-less minimold, suitable for surface mount.
This IC is manufactured using our UHS4 (Ultra High Speed Process) SiGe:C bipolar process.
FEATURES
• Low noise
: NF = 0.8 dB TYP. @ fin = 1 575 MHz
• High gain
: GP = 20 dB TYP. @ fin = 1 575 MHz
• Low current consumption
: ICC = 3.8 mA TYP. @ VCC = 3.0 V
• Built-in power-saving function
• High-density surface mounting
: 6-pin lead-less minimold package (1.5 s 1.1 s 0.55 mm)
• Included very robust bandgap regulator (Small VCC and TA dependence)
• Included protection circuits for ESD
APPLICATION
• Low noise amplifier for GPS and mobile communications
ORDERING INFORMATION
Part Number
Order Number
MPC8231TK-E2 MPC8231TK-E2-A
Package
6-pin lead-less minimold
(1511 PKG) (Pb-Free)
Marking
Supplying Form
6K • 8 mm wide embossed taping
• Pin 1, 6 face the perforation side of the tape
• Qty 5 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: MPC8231TK
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please confirm
that this is the latest version.
Document No. PU10613EJ01V0DS (1st edition)
Date Published April 2006 NS CP(N)

1 page




UPC8231TK pdf
MPC8231TK
TYPICAL CHARACTERISTICS (TA = +25oC, unless otherwise specified)
CIRCUIT CURRENT vs. SUPPLY VOLTAGE
6
CIRCUIT CURRENT vs.
POWER-SAVING VOLTAGE
6
5
TA = +85oC
4
5
TA = +85oC
4
3
–40oC
2
+25oC
3 +25oC
2
–40oC
1
VCC = VPS
RF = off
0
2.0 2.5 3.0 3.5 4.0
Supply Voltage VCC (V)
1
VCC = 3 V
RF = off
0
0 0.5 1.0 1.5 2.0 2.5 3.0
Power-Saving Voltage VPS (V)
POWER GAIN vs. FREQUENCY
24
TA = –40oC
22
20
18 +25oC
+85oC
16
14
1 500
1 525
1 550
VCC = VPS = 3 V
1 575
1 600
Frequency fin (MHz)
POWER GAIN vs. OPERATING
AMBIENT TEMPERATURE
24
22
20
18
16
14
–50 –25
0
VCC = VPS = 3 V
fin = 1 575 MHz
25 50 75 100
Operating Ambient Temperature TA (oC)
NOISE FIGURE vs. FREQUENCY
1.6
1.4 TA = +85oC
1.2
1.0
0.8
0.6
0.4
0.2
0
1 500
+25oC
–40oC
1 525
1 550
VCC = VPS = 3 V
1 575
1 600
Frequency fin (MHz)
NOISE FIGURE vs. OPERATING
AMBIENT TEMPERATURE
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
–50
–25
0
VCC = VPS = 3 V
fin = 1 575 MHz
25 50 75 100
Operating Ambient Temperature TA (oC)
Remark The graphs indicate nominal characteristics.
Data Sheet PU10613EJ01V0DS
5

5 Page





UPC8231TK arduino
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Lead (Pb)
Mercury
Cadmium
Hexavalent Chromium
PBB
PBDE
Concentration Limit per RoHS
(values are not yet fixed)
< 1000 PPM
< 1000 PPM
< 100 PPM
< 1000 PPM
< 1000 PPM
< 1000 PPM
Concentration contained
in CEL devices
-A
Not Detected
-AZ
(*)
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet UPC8231TK.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
UPC8231TKBIPOLAR ANALOG INTEGRATED CIRCUITCEL
CEL

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar