|
|
PDF ECG099 Data sheet ( Hoja de datos )
| Número de pieza | ECG099 | |
| Descripción | High Linearity InGaP HBT Amplifier | |
| Fabricantes | WJ Communication | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ECG099 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
AH118 / ECG099
¼ Watt, High Linearity InGaP HBT Amplifier Product Information
Product Features
• 60 – 3500 MHz
• +24.7 dBm P1dB
• +40.5 dBm Output IP3
• 20.4 dB Gain @ 900 MHz
• 16.5 dB Gain @ 1900 MHz
• +5V Single Positive Supply
• Available in lead-free / green
SOT-89 SMT Package Style
Applications
• Final stage amplifiers for
Repeaters
• Mobile Infrastructure
• DBS / WLL / W-LAN
• Defense / Homeland Security
Product Description
The AH118 / ECG099 is a high dynamic range driver
amplifier in a low-cost surface mount package. The
InGaP/GaAs HBT is able to achieve high performance
across a broad range with +40.5 dBm OIP3 and +24.7 dBm
of compressed 1dB power. The AH118 / ECG099 is
available in a lead-free/green/RoHS-compliant SOT-89
package. All devices are 100% RF and DC tested.
The AH118 / ECG099 is targeted for use as a driver
amplifier in wireless infrastructure where high linearity and
medium power is required. Internal biasing allows the
AH118 to maintain high linearity over temperature and
operate directly off a single +5V supply. This combination
makes the device an excellent candidate for transceiver line
cards in current and next generation multi-carrier 3G base
stations.
Functional Diagram
GND
4
1
RF IN
2
GND
3
RF OUT
Function
Input / Base
Output / Collector
Ground
Pin No.
1
3
2, 4
Specifications (1)
Parameter
Operational Bandwidth
Test Frequency
Gain
Input Return Loss
Output Return Loss
Output P1dB
Output IP3 (2)
IS-95A Channel Power
@ -45 dBc ACPR
W-CDMA Channel Power
@ -45 dBc ACLR, 2140 MHz
Noise Figure
Operating Current Range
Device Voltage
Units
MHz
MHz
dB
dB
dB
dBm
dBm
dBm
dBm
dB
mA
V
Min
60
13.5
+23
+39.5
140
Typ
1900
16.5
12
18
+24.7
+40.5
+18
+16.7
4.3
160
+5
Max
3500
175
1. Test conditions unless otherwise noted: 25ºC, Vsupply = +5 V, in tuned application circuit.
2. 3OIP measured with two tones at an output power of +11 dBm/tone separated by 1 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
Typical Performance (3)
Parameter
Frequency
S21 - Gain
S11 - Input R.L.
S22 - Output R.L.
Output P1dB
Output IP3
IS-95A Channel Power
@ -45 dBc ACPR,
W-CDMA Channel Power
@ -45 dBc ACLR
Noise Figure
Supply Bias
Units
MHz
dB
dB
dB
dBm
dBm
dBm
dBm
dB
Typical
900 1900 2140
20.4 16.5 16.3
-15 -12 -15
-12 -18 -16
+24.2 +24.7 +24.7
+40 +40.5 +40.5
+18.2 +18
+16.7
4.0 4.3 4.8
+5 V @ 160 mA
3. Typical parameters reflect performance in a tuned application circuit: Vsupply = +5 V, I = 160
mA, +25° C
Ordering Information
Absolute Maximum Rating
Parameter
Operating Case Temperature
Storage Temperature
RF Input Power (continuous)
Device Voltage
Device Current
Junction Temperature
Rating
-40 to +85 °C
-65 to +150 °C
+15 dBm
+6 V
220 mA
+250 °C
Operation of this device above any of these parameters may cause permanent damage.
Part No.
Description
AH118-89*
ECG099B*
AH118-89G
AH118-89PCB900
High Linearity InGaP HBT Amplifier
(lead-tin SOT-89 Pkg)
High Linearity InGaP HBT Amplifier
(lead-tin SOT-89 Pkg)
High Linearity InGaP HBTAmplifier
(lead-free/green/RoHS-compliant SOT-89 Pkg)
900 MHz Evaluation Board
AH118-89PCB1900 1900 MHz Evaluation Board
AH118-89PCB2140 2140 MHz Evaluation Board
* This package is being phased out in favor of the green package type which is backwards compatible for
existing designs. Refer to Product Change Notification WJPCN06MAY05TC1 on the WJ website.
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com
Page 1 of 7 June 2005
1 page  
AH118 / ECG099
¼ Watt, High Linearity InGaP HBT Amplifier
The Communications Edge TM
Product Information
AH118-89 (SOT-89 Package) Mechanical Information
This package may contain lead-bearing materials. The plating material on the leads is SnPb.
Outline Drawing
Product Marking
The component will be marked with an
“AH118” designator with an alphanumeric lot
code on the top surface of the package.
Tape and reel specification for this part is
located on the website in the “Application
Notes” section.
ESD / MSL Information
Land Pattern
ESD Rating:
Value:
Test:
Standard:
Class 1A
Passes between 250 and 500V
Human Body Model (HBM)
JEDEC Standard JESD22-A114
MSL Rating: Level 3 at +235° C convection reflow
Standard: JEDEC Standard J-STD-020
Thermal Specifications
Parameter
Rating
Operating Case Temperature
-40 to +85° C
Thermal Resistance (1)
92° C / W
Junction Temperature (2)
159° C
Notes:
1. The thermal resistance is referenced from the hottest
part of the junction to the ground tab (pin 4).
2. This corresponds to the typical biasing condition of
+5V, 160 mA at an 85° C ground tab temperature. A
minimum MTTF of 1 million hours is achieved for
junction temperatures below 247° C.
MTTF vs. GND Tab Temperature
100000
10000
Mounting Config. Notes
1. Ground / thermal vias are critical for the proper
performance of this device. Vias should use a .35mm
(#80 / .0135”) diameter drill and have a final plated
thru diameter of .25 mm (.010”).
2. Add as much copper as possible to inner and outer
layers near the part to ensure optimal thermal
performance.
3. Mounting screws can be added near the part to fasten
the board to a heatsink. Ensure that the ground /
thermal via region contacts the heatsink.
4. Do not put solder mask on the backside of the PC board
in the region where the board contacts the heatsink.
5. RF trace width depends upon the PC board material
and construction.
6. Use 1 oz. Copper minimum.
7. All dimensions are in millimeters (inches). Angles are
in degrees.
1000
100
60
70 80 90 100 110 120
Tab Temperature (°C)
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com
Page 5 of 7 June 2005
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet ECG099.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ECG099 | High Linearity InGaP HBT Amplifier | WJ Communication |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |