|
|
PDF HFBR-53A3VFM Data sheet ( Hoja de datos )
| Número de pieza | HFBR-53A3VFM | |
| Descripción | Fiber Optic Transceivers | |
| Fabricantes | Hewlett-Packard | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HFBR-53A3VFM (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Agilent HFBR-53A3VEM/HFBR-53A3VFM
3.3 V 1 x 9 Fiber Optic Transceivers
for Fibre Channel
Data Sheet
Description
The HFBR-53A3VEM/FM
transceivers from Agilent
Technologies allow the system
designer to implement a range of
solutions for multimode Fibre
Channel applications.
The overall Agilent transceiver
product consists of three sections:
the transmitter and receiver optical
subassemblies, an electrical
subassembly, and the package
housing which incorporates a
duplex SC connector receptacle.
Transmitter Section
The transmitter section of the
HFBR-53A3VEM/FM consists of an
850 nm Vertical Cavity Surface
Emitting Laser (VCSEL) in an
Optical Subassembly (OSA), which
mates to the fiber cable. The OSA is
driven by a custom, silicon bipolar
IC which converts differential PECL
compatible logic signals into an
analog laser diode drive current.
The high speed output lines are
internally ac-coupled and
differentially terminate with a 100 Ω
resistor.
Receiver Section
The receiver of the
HFBR-53A3VEM/FM includes a
GaAs PIN photo-diode mounted
together with a custom, silicon
bipolar transimpedance
preamplifier IC in an OSA. This
OSA is mated to a custom silicon
bipolar circuit that provides post-
amplification and quantization.
The post-amplifier also includes a
Signal Detect circuit which pro-
vides a TTL logic-high output
upon detection of a usable input
optical signal level. The high
speed output lines are internally
ac-coupled.
Features
• Compliant with ANSI X3.297-1996
Fibre Channel Physical Interface
FC-PH-2 revision 7.4 proposed
specification for 100-M5-SN-I and
100-M6-SN-I signal interfaces
• Performance
HFBR-53A3VEM/FM:
300 m links in 62.5/125 µm MMF cables
500 m links in 50/125 µm MMF cables
• Wave solder and aqueous wash
process compatible
• Industry standard mezzanine height
1 x 9 package style with integral
duplex SC connector
• IEC 60825-1 Class 1/CDRH Class I
laser eye safe
• Single +3.3 V power supply operation
with PECL compatible logic
interfaces and TTL Signal Detect
Applications
• Mass storage systems I/O
• Computer systems I/O
• High-speed peripheral interface
• High-speed switching systems
• Computer systems I/O
• Host adapter I/O
• RAID cabinets
Related Products
• Physical layer ICs available for
optical or copper interface
(HDMP-1636A/1646A)
• Versions of this transceiver module
also available for +5 V operation
(HFBR/HFCT-53D3)
• MT-RJ SFF fiber optic transceivers
for Fibre Channel
(HFBR-HFCT-5910E)
• Gigabit Interface Converters (GBIC)
for Fibre Channel: HFBR-5602 (SWL)
and HFCT-5612 (LWL)
1 page  
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause catastrophic damage to the device. Limits apply to each
parameter in isolation, all other parameters having values within the recommended operating conditions. It should not
be assumed that limiting values of more than one parameter can be applied to the product at the same time. Exposure
to the absolute maximum ratings for extended periods can adversely affect device reliability.
Parameter
Symbol Min. Typ.
Max.
Unit
Reference
Storage Temperature
Supply Voltage
Transmitter Differential Input Voltage
Relative Humidity
TS
VCC
VD
RH
–40
–0.5
5
+100 ˚C
5.0 V
2.2 V
95 %
1
TTL Signal Detect Output Current – Low
TTL Signal Detect Output Current – High
IOLMAX
IOHMAX
–5.0
mA
4.0 mA
Recommended Operating Conditions
Parameter
Ambient Operating Temperature
Case Temperature
Supply Voltage
Power Supply Rejection
Transmitter Differential Input Voltage
Received Data Output Load
TTL Signal Detect Output Current – Low
TTL Signal Detect Output Current – High
Symbol
TA
TC
VCC
PSR
VD
RDL
IOL
IOH
Min.
0
0
3.14
0.4
–400
Typ.
100
50
Max.
+70
+80
3.47
1.6
1.0
Unit
˚C
˚C
V
mVP–P
V
Ω
mA
µA
Reference
2
3
Process Compatibility
Parameter
Hand Lead Soldering Temperature/Time
Wave Soldering and Aqueous Wash
Symbol
TSOLD/tSOLD
TSOLD/tSOLD
Min. Typ.
Max.
+260/10
+260/10
Unit
˚C/s
˚C/s
Reference
4
Notes:
1. The transceiver is Class 1 eye safe up to VCC = 5.0 V.
2. Case temperature measurement referenced to the metal housing.
3. Tested with a 100 mVP–P sinusoidal signal in the frequency range from 10 Hz to 2 MHz on the VCC supply with the recommended power supply
filter (with C8) in place. Typically less than a 1 dB change in sensitivity is experienced.
4. Aqueous wash pressure < 110 psi.
5
5 Page 
1.014
0.8
2x (0.032)
0.8
2x (0.032)
9.4
(0.374)
5.35
(0.25)
MODULE
PROTRUSION
27.4 ± 0.50
(1.08 ± 0.02)
10.9
+ 0.5
– 0.25
( )0.43
+ 0.02
– 0.01
PCB BOTTOM VIEW
Figure 6. Suggested module positioning and panel cut-out for HFBR-53A3VEM.
11
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet HFBR-53A3VFM.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HFBR-53A3VFM | Fiber Optic Transceivers | Hewlett-Packard |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |