DataSheetWiki


ENH104V2-450 fiches techniques PDF

WEDC - (ENH104V2-xxx) Color TFT-LCD Module Features

Numéro de référence ENH104V2-450
Description (ENH104V2-xxx) Color TFT-LCD Module Features
Fabricant WEDC 
Logo WEDC 





1 Page

No Preview Available !





ENH104V2-450 fiche technique
www.DataSheet4U.com
White Electronic Designs
Display Systems Division
ENH104V2-380/450/600
ENH104V2-380/450/600 Color TFT-LCD Module Features
GENERAL DESCRIPTION
SPECIFICATIONS
WEDC provides optically enhanced solutions to the
standard Optrex AA104VB05 color TFT-LCD (Thin Film
Transistor Liquid Crystal Display) module. The first
enhancement is an index matching (IM) film lamination
to the front surface of the display polarizer. The IM film
is a contrast enhancement benefit and is available in
two surface treatments - IM/Clear and IM/110 (a 10%
diffusion).The second enhancement is the incorporation
of reflective polarizer (RP) to improve brightness by up to
40%. The third enhancement is the incorporation of an
enhanced light guide (ELG) to improve brightness by up
to 35%. The resultant brightness level are shown in the
Specifications below.
This module is composed of a color LCD panel, driver ICs,
control circuit, and a backlight unit.
By applying 6 bit digital data 640 x 480, 260K-color images
are displayed on the 10.4" diagonal screen.
Input power voltage is single 3.3V/5V for LCD driving. Both
3.3V-CMOS and 5.0V-CMOS level voltage are acceptable
for logic input voltage.
Inverter for backlight is not included in this module. General
specifications are summarized in the following table:
ITEM
Display Area (mm)
Number of Dots
Pixel Pitch (mm)
Color Pixel Arrangement
Display Mode
Number of Color
Wide Viewing Angle Technology
Optimum Viewing Angle
(Contrast ratio)
Brightness (cd/m2)
ENH104V2-380 (IM only)
ENH104V2-450 (IM, RP)
ENH104V2-600 (IM, RP, ELG)
Module Size (mm)
Module Mass (g)
Backlight Unit
Surface Treatment
SPECIFICATION
211.2 (H) x 158.4 (V) (10.39-inch
diagonal)
640 x 3 (H) x 480 (V)
0.33 (H) x 0.33 (V)
RGB vertical stripe
normally white
260K
Optical compensation film
12 o'clock
380
450
600
243.0 (W) x 181.6 (H) x 12.2 (D)
530
CCFL, 2-tubes, replacements
IM/Clear (glossy) or IM/110 and
hardcoat 3H
Characteristic value without any note is typical value.
The LCD product described in this specification is designed
and manufactured for the standard use in office automation
equipment, instrumentation, communication equipment,
automation, point of sale, etc.
WEDC assumes no responsability for any damage
resulting from the use of the device which does not
comply with the instructions and the precautions specified
in these specifications sheets. WEDC does assume the
responsability for the warranty of the enhanced product.
ABSOLUTE MAXIMUM RATINGS
ITEM
SYMBOL
MIN
Power Supply Voltage for LCD
VCC -0.3
Logic Input Voltage
VI 0
Lamp Voltage
VL 0
Lamp Current
IL 0
Lamp Frequency
FL -
Operating temperature (1)
TOP 0
Storage Temperature (1)
TSTG -20
Notes:
1. tOP, tSTG < 40°C: 90%RH max. without condensation
2. tOP, tSTG < 40°C: Absolute humidity shall be less than the value of 90%RH at 40°C without condensation.
MAX
6.5
6.5
2000
10.0
80
50
60
Unit
V
V
VRMS
mArms
kHz
°C
°C
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
Original specifications created by Sharp.
August 2003
Rev. 0
1 Display Systems Division • Hillsboro, OR • (503) 690-2460 • www.wedc.com

PagesPages 15
Télécharger [ ENH104V2-450 ]


Fiche technique recommandé

No Description détaillée Fabricant
ENH104V2-450 (ENH104V2-xxx) Color TFT-LCD Module Features WEDC
WEDC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche