DataSheetWiki


OPF396A fiches techniques PDF

OPTEK Technologies - (OPF396x) Fi ber Op tic GaA lAs High Speed LED

Numéro de référence OPF396A
Description (OPF396x) Fi ber Op tic GaA lAs High Speed LED
Fabricant OPTEK Technologies 
Logo OPTEK Technologies 





1 Page

No Preview Available !





OPF396A fiche technique
www.DataSheet4U.com
Product Bulletin OPF396
August 1996
Fiber Optic GaAlAs High Speed LED in SMA Receptacle
Types OPF396A, OPF396B, OPF396C, OPF396D
Features
Component pre-mounted and ready
to use
Pre-tested with fiber to assure
performance
Popular SMA style receptacle
High Speed
Electrically isolated from case
Description
The OPF396 series LED consists of a
low cost plastic cap LED, pre-mounted
and aligned in an SMA receptacle. This
configuration is designed for PC board
or panel mounting. Includes lock washer
and jam nut, two 2-56 screws, and a dust
cap.
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0 V
Continuous Forward Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA(4)
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55o C to +100o C
Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40o C to +85o C
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering
iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240o C(1)
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 sec. max when flow soldering.
(2) Graded index fiber, 50 µm core, N.A. = 0.20.
(3) To convert radiant power output to dBm, use the following expression dBm = 10 log
(µW/1000).
(4) Derate linearly @ 1.0 mA/o C above 25o C.
(5) Prebias @ 5 mA current.
LED Burn-in
All LED's are subject to 100% burn-in testing. Test conditions are 96 hours at 100 mA
continuous current in 25o C ambient.
The LED’s are designed to interface with
mulitmode optical fibers from 50/125 to
200/300 microns.
TYPICAL COUPLED POWER into OPTICAL FIBER
Fiber
Refractive
Index
50/125 µm Graded
62.5/125 µm Graded
100/140 µm Graded
200/300 µm* Step
*PCS - Plastic Clad Silica
Typical Coupled Power
IF = 100 mA @ 25o C
N.A. OPF396D OPF396C OPF396B OPF396A
0.20
0.28
0.29
0.41
7.5 µW
27 µW
58 µW
290 µW
12.5 µW
35 µW
85 µW
450 µW
18 µW
45 µW
115 µW
545 µW
25 µW
75 µW
170 µW
650 µW
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
8-64
(972) 323-2200
Fax (972) 323-239

PagesPages 2
Télécharger [ OPF396A ]


Fiche technique recommandé

No Description détaillée Fabricant
OPF396A (OPF396x) Fi ber Op tic GaA lAs High Speed LED OPTEK Technologies
OPTEK Technologies
OPF396B (OPF396x) Fi ber Op tic GaA lAs High Speed LED OPTEK Technologies
OPTEK Technologies
OPF396C (OPF396x) Fi ber Op tic GaA lAs High Speed LED OPTEK Technologies
OPTEK Technologies
OPF396D (OPF396x) Fi ber Op tic GaA lAs High Speed LED OPTEK Technologies
OPTEK Technologies

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche