DataSheetWiki


ADG3301 fiches techniques PDF

Analog Devices - Single-Channel Bidirectional Logic Level Translator

Numéro de référence ADG3301
Description Single-Channel Bidirectional Logic Level Translator
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADG3301 fiche technique
www.DataSheet4U.com
Low Voltage 1.15 V to 5.5 V, Single-Channel
Bidirectional Logic Level Translator
ADG3301
FEATURES
Bidirectional level translation
Operates from 1.15 V to 5.5 V
Low quiescent current < 5 µA
No direction pin
APPLICATIONS
SPI®, MICROWIRE® level translation
Low voltage ASIC level translation
Smart card readers
Cell phones and cell phone cradles
Portable communication devices
Telecommunications equipment
Network switches and routers
Storage systems (SAN/NAS)
Computing/server applications
GPS
Portable POS systems
Low cost serial interfaces
GENERAL DESCRIPTION
The ADG3301 is a single-channel, bidirectional logic level
translator. It can be used in multivoltage digital system applica-
tions such as data transfer between a low voltage DSP/controller
and a higher voltage device. The internal architecture allows the
device to perform bidirectional logic level translation without an
additional signal to set the direction in which the translation
takes place.
The voltage applied to VCCA sets the logic levels on the A side of
the device, while VCCY sets the levels on the Y side. For proper
operation, VCCA must always be less than VCCY. The VCCA-
compatible logic signals applied to the A pin appear as VCCY-
compatible levels on the Y pin. Similarly, VCCY-compatible logic
levels applied to the Y pin appear as VCCA-compatible logic levels
on the A pin. The enable pin (EN) provides three-state operation
on both the A pin and the Y pin. When the device enable pin is
pulled low, the terminals on both sides of the device are in the
high impedance state. The EN pin is referred to the VCCA supply
voltage and driven high for normal operation.
The ADG3301 is available in a compact 6-lead SC70 package
and is guaranteed to operate over the 1.15 V to 5.5 V supply
voltage range and extended −40°C to +85°C temperature range.
FUNCTIONAL BLOCK DIAGRAM
VCCA
VCCY
AY
EN ADG3301
GND
Figure 1.
PRODUCT HIGHLIGHTS
1. Bidirectional level translation.
2. Fully guaranteed over the 1.15 V to 5.5 V supply range.
3. No direction pin.
4. Compact 6-lead SC70 package.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
© 2005 Analog Devices, Inc. All rights reserved.

PagesPages 20
Télécharger [ ADG3301 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADG3300 8-Channel Bidirectional Logic Level Translator Analog Devices
Analog Devices
ADG3301 Single-Channel Bidirectional Logic Level Translator Analog Devices
Analog Devices
ADG3304 Bidirectional Logic Level Translator Analog Devices
Analog Devices
ADG3308 8-Channel Bidirectional Logic Level Translators Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche