DataSheetWiki


AAT3170 fiches techniques PDF

ANALOGICTECH - High Current LED Flash Driver Charge Pump IC

Numéro de référence AAT3170
Description High Current LED Flash Driver Charge Pump IC
Fabricant ANALOGICTECH 
Logo ANALOGICTECH 





1 Page

No Preview Available !





AAT3170 fiche technique
www.DataSheet4U.com
AAT3170
High Current LED Flash Driver Charge Pump IC
General Description
Features
ChargePump
The AAT3170 is a high output current, high effi-
ciency, low noise, low profile charge pump DC/DC
converter, ideal for multi-function LED photo-flash
applications where solution cost, size, and efficien-
cy are critical.
The dual charge pump in the AAT3170 is capable
of delivering 600mA output current. Two current-
controlled paths are available for users of dual
flash LEDs that prefer current matching. Each LED
channel can be easily programmed in 32 steps with
a single GPIO output through the AS2Cwire™
(Advanced Simple Serial Control™) interface. This
allows smooth transitions and flexible adjustment
of brightness in flash or other lighting modes.
The tri-mode (1X/1.5X/2X) operation of the internal
charge pump offers excellent power efficiency for
both flash and movie modes. Combined with a low
external parts count (two 1µF flying capacitors and
one small bypass capacitor at VIN and OUT), the
AAT3170 is ideally suited for small, battery-powered
applications.
The AAT3170 has a thermal management system to
protect the device in the event of a short-circuit con-
dition at the output pin. Built-in soft-start circuitry
prevents excessive inrush current during start-up.
The shutdown feature disconnects the load from VIN
and reduces quiescent current to less than 1.0µA.
The AAT3170 is available in the Pb-free, thermally-
enhanced, 12-pin 3x3mm TDFN package.
• VIN Range: 2.7V to 5.5V
• 600mA Output Current
• Tri-Mode 1X/1.5X/2X in Current Mode
• Voltage Mode Operation: 1.5X, 200mA
• Dual Regulated Current Sinks
• Current Match Between Current Sinks
• 32 Current Steps Set by AS2Cwire
• 1µF Input, Output, and Flying Capacitors
• <1.0µA of Shutdown
• Small Application Circuit
• No Inductors
• Automatic Soft Start
• 12-Pin TDFN 3x3mm Package
• -40°C to +85°C Temperature Range
Applications
• Camera Phones
• Digital Still Cameras (DSCs)
• PDAs and Notebook PCs
• Smart Phones
Typical Application
C1 C2
1µF 1µF
2.7V to 5.5V
C1+
VIN
C1- C2+ C2-
VOUT
CIN
4.7µF
AAT 3170
COUT
2.2µF
Flash
LED 1
EN/SET
CT
0.1µF
EN/SET
CT
GND
F1
F2
Flash
LED 2
3170.2006.10.1.0
DataSheet4 U .com
1

PagesPages 15
Télécharger [ AAT3170 ]


Fiche technique recommandé

No Description détaillée Fabricant
AAT3170 High Current LED Flash Driver Charge Pump IC ANALOGICTECH
ANALOGICTECH
AAT3171 High Efficiency Charge Pump AAT
AAT
AAT3172 High Current LED Flash Driver Charge Pump IC ANALOGICTECH
ANALOGICTECH
AAT3174 High Current LED Flash Driver Charge Pump IC ANALOGICTECH
ANALOGICTECH

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche