|
|
Número de pieza | HA13566AF | |
Descripción | Combo (Spindle & VCM) Driver | |
Fabricantes | Hitachi Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HA13566AF (archivo pdf) en la parte inferior de esta página. Total 20 Páginas | ||
No Preview Available ! HA13566AF
Combo (Spindle & VCM) Driver
ADE-207-250 (Z)
1st Edition
December 1997
Description
The HA13566AF is combination of Spindle and VCM Driver designed for HDD and have following
functions and features.
Functions
• 1.0 A max/3-phase spindle motor driver
• 400 mA max VCM driver
• 100 mA max retract driver
• 11 bit serial interface
• 9 bit DAC for VCM control
• Commutation logic for sensor-less motor
• Center tap pull-up driver for half wave driver
• Soft switching matrix
• Charge pump
• Booster
• Power monitor
• OTSD
Features
• Low output saturation voltage
Spindle driver 1.0 V typ (@0.8 A)
0.2 V typ (@0.1 A)
VCM driver
1.0 V typ (@400 mA)
• Soft switching drive
• Minimum surface mount package
body size 7 × 7 mm
1 page HA13566AF
Mode Control Register (A0 = 1)
Bit
Symbol
1
0
Note
MD0
SPNENAB
Spindle enable
Spindle disable
1
MD1
BRAKE
Brake enable
Brake disable
1
MD2
Not use
—
—
MD3
HALF
Half wave drive
Full wave drive
MD4
EXTCOM
External commutation Internal commutation 2
MD5
SOFTSW
Soft switching
Switching
MD6
VCMENAB
VCM enable
VCM disable
MD7
RETRACT
Retracting
Not retracting
MD8
POLESEL
for 12 poles motor
for 8 poles motor
3
MD9
FBOOST
Low frequency
High frequency
4
Notes: 1. The spindle motor is independently winding to the value of the MD2, during the MD1 is true.
2. The bit MD4 select a commutation mode at driving by B-EMF sensing. (See Commutation
timing)
3. In order to prevent the misdetection of back-EMF amplifier, the bit MD8 should be chosen as
shown above table.
4. The bit MD9 determine the operating frequency of Booster Circuit. According to the frequency of
Input CLK at pin 10, the value of MD9 should be chosen as shown below.
CLK (at pin 10)
MD9
7.1 MHz to 10 MHz
0
4.0 MHz to 7.0 MHz
1
Input Data Register (A0 = 0)
Bit / DD0 to DD9: These input data are used to control the output current at VCM driver as shown follows.
MSB
LSB
DD9 DD8 DD7 DD6 DD5 DD4 DD3 DD2 DD1 DD0
VCMGAIN
Input data of DAC
Figure 3 Input Data (2)
5
5 Page Internal Commutation Mode (Half Wave Mode)
+
B-EMF 0
–
UV
W
PHASE
0
COMM 0
U-Current
Switching
mode
+
0
–
U-Current
Soft
switching
mode
+
0
–
– 50 %
HA13566AF
11
11 Page |
Páginas | Total 20 Páginas | |
PDF Descargar | [ Datasheet HA13566AF.PDF ] |
Número de pieza | Descripción | Fabricantes |
HA13566AF | Combo (Spindle & VCM) Driver | Hitachi Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |