DataSheetWiki


SAA7804 fiches techniques PDF

NXP Semiconductors - One Chip CD Audio Device

Numéro de référence SAA7804
Description One Chip CD Audio Device
Fabricant NXP Semiconductors 
Logo NXP Semiconductors 





1 Page

No Preview Available !





SAA7804 fiche technique
www.DataSheet4U.com
SAA7804
One chip CD audio device
Rev. 02 — 13 June 2005
Product data sheet
1. General description
The SAA7804, is a single chip solution CD audio decoder, digital servo, audio DAC,
pre-amp, laser driver and integrated ARM7TDMI-S microprocessor, targeted at a range of
CD applications. The channel decoder design is derived from the SAA7817 DVD decoder
IC, with optimization and design improvements specifically for CD audio (e.g. improved
CD playability). The digital servo, analog pre-amp, laser driver and audio DAC blocks are
improved designs based on the SAA7824 CD decoder IC. Further architectural
enhancements to the design have been made to integrate system functionality and reduce
the system cost of ownership. The SAA7804 IC supports a generic architecture that will
form the basis of future variants in the SAA7804 IC family optimized for different CD
applications.
2. Features
2.1 Hardware features
s Channel decoder based on SAA7817 IC design
s Digital servo based on SAA7824 IC design
s 32-bit embedded ARM7 RISC microprocessor supporting both 32-bit and 16-bit
Thumb instruction sets
s Mask programmed internal program ROM for microprocessor
s Register structure redesigned to utilize the complete 32-bit bandwidth of the integrated
microprocessor bus architecture
s Programmable clock frequency for ARM microprocessor - allowing users to trade-off
power consumption and processing power depending on requirements
s Microprocessor access to digital representations of the diode input signals from the
optical pick up; the microprocessor can also generate the servo output signals RA, FO,
SL and allows the possibility of additional servo algorithms or a complete servo
implementation in software
s Microprocessor access to audio streams; both from the internal CD decoder and an
external stereo auxiliary input (e.g. an analog source from a tuner; converted to digital
via on-chip ADCs) to allow audio processing algorithms in the ARM microprocessor;
e.g. bass boost and volume control
s Two general purpose analog inputs (A_IN_1 and A_IN_2) allowing the ARM
microprocessor access to other external analog signals; e.g. low cost keypad;
temperature sensor; via on-chip ADCs
s Two analog inputs for external audio sources (e.g. tuner) which can be accessed by
the ARM for audio processing
s Slave I2S-bus mode in which the channel decoder can synchronize the CD playback
speed to an input I2S-bus clock
DataSheet4 U .com

PagesPages 30
Télécharger [ SAA7804 ]


Fiche technique recommandé

No Description détaillée Fabricant
SAA7803 One Chip CD Audio Device NXP Semiconductors
NXP Semiconductors
SAA7804 One Chip CD Audio Device NXP Semiconductors
NXP Semiconductors
SAA7806 One Chip CD Audio Device NXP Semiconductors
NXP Semiconductors

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche