DataSheetWiki


OPB87x fiches techniques PDF

Optek Technology - (OPBxxx) Slotted Optical Switches

Numéro de référence OPB87x
Description (OPBxxx) Slotted Optical Switches
Fabricant Optek Technology 
Logo Optek Technology 





1 Page

No Preview Available !





OPB87x fiche technique
www.DataSheet4U.com
Slotted Optical Switch
OPB355, OPB360, OPB370, OPB380, OPB390
OPB859, OPB860, OPB870, OPB880, OPB890
Series
Features:
0.125” (3.175 mm) slot width
Choice of aperture (0.050” or 0.010” width)
Choice of opaque or IR transmissive shell material
Choice of mounting configurations
Choice of lead spacing or wires
Product Photo Here
Description:
Each device in this series provides the flexibility of a custom device from a standard product line. Building from a
standard housing with a 0.125” (3.175 mm) wide slot, a user can choose aperture width, opaque or IR
transmissive housing shell material, PCBoard lead spacing or wires and mounting tab configuration.
Housings are made from an opaque grade of injection-molded plastic to minimize sensitivity to both visible and
near-infrared light. Discrete shells exposed on the parallel faces inside each device’s throat are made from either
IR transmissive plastic (for applications where dust protection is needed) or from opaque plastic with aperture
openings (for applications that require maximum protection against ambient light).
Phototransistor sensor devices include the OPB859, PB360, OPB370, OPB380, OPB390, OPB860 and OPB870,
while the OPB355 provides a photodiode sensor. The photodiode sensor has a lower and more linear output-
versus-light input than the phototransistor models.
The OPB355, OPB360, OPB370, OPB859, OPBD8a6ta0SahnedeOt4PUB.c8o7m0 are designed for direct connection to through
hole PCBoards. The OPB380, OPB390, OPB880 and OPB890 have 26 AWG wires connected directly to the
device for remote sensing applications.
DataShee
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
Non-contact object sensing
Assembly line automation
Machine automation
Equipment safety
Machine safety
OPB360, OPB370, OPB380, OPB390
OPB859
OPB860, OPB870, OPB880, OPB890
13
OPB355
13
24
24
RoHS
DataSheet4U.com
CONTAINS POLYSULFONE
To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking.
Vibra-Tite evaporates fast without causing structural failure in OPTEK’s molded plastics.
Applies to: OPB360, OPB370, OPB380, OPB390
and OPB860, OPB870, OPB880, OPB890.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A 02/06
Page 1 of 10
DataSheet4 U .com

PagesPages 10
Télécharger [ OPB87x ]


Fiche technique recommandé

No Description détaillée Fabricant
OPB870 (OPB860 / OPB870 Series) Slotted Optical Switches Optek Technology
Optek Technology
OPB870L (OPB870 Series) Hi-rel slotted optical switch Optek Technology
Optek Technology
OPB870N (OPB870 Series) Hi-rel slotted optical switch Optek Technology
Optek Technology
OPB870P (OPB870 Series) Hi-rel slotted optical switch Optek Technology
Optek Technology

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche