|
|
PDF NSTM515AS Data sheet ( Hoja de datos )
| Número de pieza | NSTM515AS | |
| Descripción | SPECIFICATIONS FOR NICHIA FULL COLOR LED | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NSTM515AS (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
No. STSE-CM2199A
<Cat.No.020911>
SPECIFICATIONS FOR NICHIA FULL COLOR LED
MODEL : NSTM515AS
DataSheet4U.com
DataShee
NICHIA CORPORATION
DataSheet4U.com
DataSheet4 U .com
-0-
DataSheet4U.com
1 page  
www.DataSheet4U.com
Nichia STSE-CM2199A
<Cat.No.020911>
7.CAUTIONS
(1) Lead Forming
· When forming leads, the leads should be bent at a point at least 3mm from the base of the epoxy bulb.
Do not use the base of the leadframe as a fulcrum during lead forming.
· Lead forming should be done before soldering.
· Do not apply any bending stress to the base of the lead. The stress to the base may damage the
characteristics or it may break the LEDs.
· When mounting the LEDs onto a printed circuit board, the holes on the circuit board should be
exactly aligned with the leads of the LEDs. If the LEDs are mounted with stress at the leads,
it causes deterioration of the epoxy resin and this will degrade the LEDs.
(2) Storage
· The LEDs should be stored at 30°C or less and 70%RH or less after being shipped from Nichia and
the storage life limits are 3 months. If the LEDs are stored for 3 months or more, it can be stored for
a year by a sealed container with a nitrogen atmosphere and moisture absorbent material.
· The leads are plated with silver. The surface ingredients of leads will be changed by contact with
corroded gas etc. And it will cause the problem when soldering LEDs.
Precautions must be taken to maintain a clean storing atmosphere. And it is recommended to use
LEDs as soon as possible.
· Rapid temperature changes makes the moisture into the drop of water. Use storage areas where there
et4U.com is minimal temperature fluctuation.
DataSheet4U.com
DataShee
(3) Static Electricity
· Static electricity or surge voltage damages the Blue/Green LEDs.
It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs.
· All devices, equipments and machinery must be properly grounded.
It is recommended that measures be taken against surge voltage to the equipment that mounts the LEDs.
· When inspecting the final products in which LEDs were assembled, it is recommended to check
whether the assembled LEDs are damaged by static electricity or not. It is easy to find
static-damaged LEDs by a light-on test or a VF test at a lower current (below 1mA is recommended).
· Damaged LEDs will show some unusual characteristics such as the leak current remarkably
increases, the forward voltage becomes lower, or the LEDs do not light at the low current.
Criteria : (VF > 2.0V at IF=0.5mA)
DataSheet4U.com
DataSheet4 U .com
-4-
DataSheet4U.com
5 Page 
Red Cathode
Common Anode
Blue Cathode
Green Cathode
1.5MAX.
Stopper
φ 5.6
(3) (3)
1 7.3
8.3
12.1 ± 0.5
24.6 ± 1
ITEM
RESIN(MOLD)
LENS COLOR
LEAD FRAME
MATERIALS
Epoxy Resin
Milky (Diffusion type)
Ag Plating Copper Alloy
Remark:
Bare copper alloy is exposed at tie-bar portion
after cutting.
The lamps have sharp and hard points that may
injure human eyes or fingers etc., so please pay
enough care in the handling.
1
Model
NSTM515AS
Unit
mm
NICHIA CORPORATION Title
No.
OUTLINE DIMENSIONS 3/1
Scale
011120106831
Allow
±0.2
11 Page | ||
| Páginas | Total 15 Páginas | |
| PDF Descargar | [ Datasheet NSTM515AS.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NSTM515AS | SPECIFICATIONS FOR NICHIA FULL COLOR LED | ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |