|
|
Número de pieza | AD6C111 | |
Descripción | Relay | |
Fabricantes | Solid State Optronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AD6C111 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! www.DataSheet4U.com
AD6C111
1 Form A
Solid State Relay
DESCRIPTION
The AD6C111 is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace
electromechanical relays in general purpose switching applications. The relay consists of an integrated circuit that drives two rugged
source-to-source enhancement type DMOS transistors - optically coupled to a light emitting diode. The output MOS transistors are
protected with free-wheeling diodes that can handle up to 1.5A of inrush current, making the relay ideal for switching lamps and highly
inductive loads.
FEATURES
APPLICATIONS
• Low input control power consumption (2.5mA TYP)
• 120mA maximum continuous load current
• 35 ohms maximum on-resistance
• High input-to-output isolation
• Long life/high reliability
• Reed relay replacement
• Meter reading systems
• Medical equipment
• Battery monitoring
• Multiplexers
OPTIONS/SUFFIXES*
ABSOLUTE MAXIMUM RATINGS*
• -S Surface Mount Leadform Option
PARAMETER
UNIT MIN TYP MAX
• -TR Tape and Reel Option
Storage Temperature
°C
NOTE: Suffixes listed above are not included in marking on
www.DataSheet4U.comdevice for part number identification.
Operating Temperature
°C
-55
-40
125
85
SCHEMATIC DIAGRAM
Continuous Input Current
Transient Input Current
mA
mA
40
400
Reverse Input Control
Voltage
Output Power Dissipation
V
mW
6
800
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• BABT CERTIFICATE #607836
BS EN 60950, BS EN 41003, BS EN 60065
• CSA CERTIFICATE #LR111581-1
• UL FILE #E201932
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
DataSheet4 U .com
Page 1 of 5
AD6C111
rev 1.40 (10/25/2004)
www.DataSheet4U.com
1 page www.DataSheet4U.com
AD6C111
1 Form A
Solid State Relay
www.DataSheet4U.com
DISCLAIMER
Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO
reserves the right to make changes to product description, specifications at any time without further notice.
SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent
licenses nor indemnity are expressed or implied.
Except as specified in SSO's Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other
warranty, expressed or implied, including merchantability and fitness for particular use.
LIFE SUPPORT POLICY
SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or
death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all
damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be
reasonably expected to result in significant injury to the user, or (d) a critical component in any component of a life support device or system
whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness.
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
DataSheet4 U .com
Page 5 of 5
AD6C111
rev 1.40 (10/25/2004)
www.DataSheet4U.com
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet AD6C111.PDF ] |
Número de pieza | Descripción | Fabricantes |
AD6C111 | Relay | Solid State Optronics |
AD6C112 | Relay | Solid State Optronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |