|
|
PDF IBM42B10SNNAA10 Data sheet ( Hoja de datos )
| Número de pieza | IBM42B10SNNAA10 | |
| Descripción | (IBM42B10SNNAA10 / IBM42B12SNNAA10) Gigabit Ethernet / Fiber Channel 1x9 Transceiver | |
| Fabricantes | IBM Microelectronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de IBM42B10SNNAA10 (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
.
IBM42B10SNNAA10
IBM42B12SNNAA10
Gigabit Ethernet/Fibre Channel 1X9 Transceiver
Features
• International Class 1 laser safety certified
• 1.0625 Gb/s or 1.25 Gb/s data rates
• (ANSI) Fibre Channel compliant [1]
• (IEEE 802.3) Gigabit Ethernet compliant [3]
• Short wavelength (SW) (distance ≤ 550 m)
• Gigabit electrical serial interface
• Serial electrical ⇔ light conversion
• LVTTL Signal-Detect output
• AC coupling of PECL signals
• Compatible with +3.3 V or +5 V power supplies
• Withstands normal wave solder and aqueous
spray cleaning
• UL and CSA approved
• Low bit error rate (< 10-12)
• High reliability: AFR < 0.01%/khr@50°C,100 FIT
Applications
• Gigabit Fibre Channel
• Gigabit Ethernet
• Client/Server environments
• Distributed multi-processing
• Fault tolerant applications
• Visualization, real-time video, collaboration
• Channel extenders, data storage, archiving
• Data acquisition
Description
The 1.0625/1.25 Gb/s 1X9 Transceiver (1X9-
1063/1250-SW) is an integrated fiber optic trans-
ceiver that provides a high-speed serial link at a sig-
naling rate up to 1.25 Gb/s. The 1X9-1063-SW
conforms to the American National Standards Insti-
tute’s (ANSI) Fibre Channel, FC-PI specification for
short wavelength operation (100-M5-SN-I and 100-
M6-SN-I). The 1X9-1250-SW conforms to IEEE
802.3z 1000Base-SX standard [3].
The 1X9-1063/1250-SW is ideally suited for Gigabit
Ethernet, and Fibre Channel applications which
include point to point links as well as Fibre Channel
Arbitrated Loop (FC-AL). It can also be used for
other serial applications where high data rates are
required.
The1X9-1063/1250-SW uses a short wavelength
(850nm) VCSEL (Vertical Cavity Surface Emitting
Laser) source. This enables low cost data transmis-
sion over optical fibers at distances up to 500 m at
1.0625 Gb/s and 550 m at 1.25 Gb/s. A 50/125 µm
multimode optical fiber, terminated with an industry
standard SC connector, is the preferred medium. (A
62.5/125 µm multimode fiber can be substituted with
shorter maximum link distances.)
Encoded (8B/10B) [4], [5], gigabit serial differential
PECL signals traverse a PTH connector interfacing
the 1X9-1063/1250-SW to the host card. The incom-
ing serial data modulates the laser and is sent out
over the outgoing fiber of a duplex cable.
Incoming modulated light is detected by a photore-
ceiver mounted in the SC receptacle. The optical
signal is converted to an electrical signal, amplified
and delivered to the host card. This module is
designed to work with industry standard “10b” Seri-
alizer/Deserializer modules.
The 1X9-1063/1250-SW is a Class 1 laser safe
product. The optical power levels under normal
operation are at eye safe levels, and optical fiber
can be connected and disconnected without shut-
ting off the laser transmitter.
5/25/01
Page 1 of 14
1 page  
www.DataSheet4U.com
IBM42B10SNNAA10
IBM42B12SNNAA10
Gigabit Ethernet/Fibre Channel 1X9 Transceiver
Absolute Maximum Ratings
Symbol
TS
RHS
VCC
TSOLD
TSOLD
Parameter
Storage Temperature
Relative Humidity–Storage
Supply Voltage
Connector Pin Temp during soldering
Optics Temperature during soldering
Min. Typical Max.
Unit
-40 85 °C
0 95 %
-0.5 6.0 V
165/5
°C/s
100/60
°C/s
Notes
1
1, 2
1
1,3
4
1. Stresses listed may be applied one at a time without causing permanent damage. Exposure to these values for extended periods
may affect reliability. Specification compliance is only defined within Specified Operating Conditions.
2. Non-condensing environment.
3. The connector pin temperature can be measured with a thermocouple attached to pin 4 of the 1X9 header.
4. The optics temperature can be measured with a thermocouple on the device with the cover off.
Specified Operating Conditions
Symbol
Parameter
TOP Ambient Operating Temperature
VDDT, VDDR Supply Voltage, 3.3 V operation
VDDT, VDDR Supply Voltage, 5 V operation
RHOP Relative Humidity-Operating
Power Supply Interface
Symbol
ICC
ICC
ICC
ICC
PDIS
PDIS
PDIS
PDIS
Parameter
Supply Current (@ 3.3 V)
Supply Current (@ 3.465 V)
Supply Current (@ 5 V)
Supply Current (@ 5.25 V)
Power Dissipation (@ 3.3 V)
Power Dissipation (@ 3.465 V)
Power Dissipation (@ 5 V)
Power Dissipation (@ 5.25 V)
Ripple & Noise
Min.
0
3.135
4.75
8
Typical
3.3
5.0
Max.
70
3.465
5.25
80
Unit
°C
V
V
%
Min
Typical
Max.
Unit
170 mA
220 mA
180 mA
230 mA
560 mW
760 mW
900 mW
1200
mW
100 mV (pk-pk)
5/25/01
Page 5 of 14
5 Page 
www.DataSheet4U.com
Mechanical Description
Package Diagram
IBM42B10SNNAA10
IBM42B12SNNAA10
Gigabit Ethernet/Fibre Channel 1X9 Transceiver
The 1X9-1063/1250-SW is intended to be used on a host card having a thickness of 0.062" to 0.100”.
5/25/01
Page 11 of 14
11 Page | ||
| Páginas | Total 15 Páginas | |
| PDF Descargar | [ Datasheet IBM42B10SNNAA10.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| IBM42B10SNNAA10 | (IBM42B10SNNAA10 / IBM42B12SNNAA10) Gigabit Ethernet / Fiber Channel 1x9 Transceiver | IBM Microelectronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |