DataSheetWiki


IBM42F12SNNAA20 fiches techniques PDF

IBM Microelectronics - (IBM42F10SNNAA20 / IBM42F12SNNAA20) Small Form Factor Transceiver

Numéro de référence IBM42F12SNNAA20
Description (IBM42F10SNNAA20 / IBM42F12SNNAA20) Small Form Factor Transceiver
Fabricant IBM Microelectronics 
Logo IBM Microelectronics 





1 Page

No Preview Available !





IBM42F12SNNAA20 fiche technique
www.DataSheet4U.com
IBM42F10SNNAA20
IBM42F12SNNAA20
1063/1250MBd Small Form Factor Transceiver with Signal Detect
Features
• International Class 1 laser safety certified
• 1063Mb/s to 1250Mb/s data rates
• (ANSI) Fibre Channel compliant [1]
• (IEEE 802.3z/d2) Gigabit Ethernet compliant [2]
• Short wavelength (SW) (distance 550m)
• Gigabit electrical serial interface
• Serial electrical light conversion
• UL & CSA approved
• LVTTL Signal-Detect Output
• Single +3.3V Power Supply
• Low bit error rate (< 10-12)
• High reliability
- AFR < 0.01 %/khr @50 C
Applications
• Gigabit Fibre Channel
• Gigabit Ethernet
• Client/Server environments
• Distributed multi-processing
• Fault tolerant applications
• Visualization, real-time video, collaboration
• Channel extenders, data storage, archiving
• Data acquisition
Description
The 1063 / 1250 Mb/s Serial Optical Converter
(SFF-1063/1250N-SW) is an integrated fiber optic
transceiver that provides a high-speed serial link at
a signaling rate of 1062.5 to 1250 Mb/s. The SFF-
1063/1250N-SW conforms to the American National
Standards Institute’s (ANSI) Fibre Channel, FC-0
specification for short wavelength operation (100-
M5-SN-I and 100-M6-SN-I). It also conforms to draft
2 of the IEEE 802.3z, 1000Base-SX standard [2].
The SFF-1063/1250N-SW is ideally suited for Fibre
Channel Arbitrated Loop (FC-AL) and Gigabit Ether-
net applications, but can be used for other serial
applications where high data rates are required.
This specification applies to a pin through hole
(PTH) module which has a 2 by 5 electrical connec-
tor pin configuration.
The SFF-1063/1250N-SW uses a short wavelength
(850nm) VCSEL (Vertical Cavity Surface Emitter
Laser) source. This enables low cost data transmis-
sion over optical fibers at distances up to 550m. A
50/125µm multimode optical fiber, terminated with
an industry standard LC connector, is the preferred
medium. (A 62.5/125µm multimode fiber can be
substituted with shorter maximum link distances.)
Encoded (8B/10B) [3], [4], gigabit/sec, serial, differ-
ential, PECL signals traverse a connector interfac-
ing the SFF-1063/1250N-SW to the host card. The
serial data modulates the laser and is sent out over
the outgoing fiber of a duplex cable.
Incoming, modulated light is detected by a photore-
ceiver mounted in the LC receptacle. The optical
signal is converted to an electrical one, amplified
and delivered to the host card. This module is
designed to work with industry standard “10b” Seri-
alizer/Deserializer modules.
The SFF-1063/1250N-SW is a Class 1 laser safe
product. The optical power levels, under normal
operation, are at eye safe levels. Optical fiber cables
can be connected and disconnected without shut-
ting off the laser transmitter.
SFF.02
1/24/00
Page 1 of 16

PagesPages 18
Télécharger [ IBM42F12SNNAA20 ]


Fiche technique recommandé

No Description détaillée Fabricant
IBM42F12SNNAA20 (IBM42F10SNNAA20 / IBM42F12SNNAA20) Small Form Factor Transceiver IBM Microelectronics
IBM Microelectronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche