DataSheetWiki


TE250F8 fiches techniques PDF

DSM - DSM Engineering Plastics

Numéro de référence TE250F8
Description DSM Engineering Plastics
Fabricant DSM 
Logo DSM 





1 Page

No Preview Available !





TE250F8 fiche technique
DSM Engineering Plastics Property Data
Stanyl® TE250F8
Polyamide 46
40% GF Reinforced, flame retardant
Properties
Physical Properties
Density
Melting Temperature
Thermal Conductivity
Mold Shrinkage(1) MD/TD
Humidity Absorption 23C, 50%RH
Mechancal Properties
Tensile Strength(2)
Tensile Elongation(2)
Tensile Modulus(3)
Charpy Impact Strength(4) 23C
Charpy Impact Strength(4) –40C
Flexural Strength(5)
Flexural Modulus(5)
Thermal Properties
HDT @1.80MPa
Coeff. Linear Thermal Expansion 20C – 80C MD/TD
Electrical Properties
Dielectric Strength
Volume Resistivily
Surface Resistivily
Dielectric Constant 23C, MHz
Dissipation Factor 23C, MHz
Flammability
Typical Data
1740
295
0.24
0.2±0.1 / 0.8±0.3
1.2
180
2
15000
10
10
250
13000
>285
2/8
>30
1015
1016
4.0
16
0.75mm V-0
(1) Measured on plaques (80x80x1mm). Depending on molding conditions.
(2) Test Speed: Reinforced=5mm/min, Non-reinforced=50mm/min
(3) Test Speed: 1mm/min.
(4) Notched, Edgewise
(5) Test Speed: Reinforced=2mm/min, Non-reinforced=10mm/min 2mm/min.
Unit
Kg/cm3
C
W/K m
%
%
MPa
%
MPa
KJ/m2
KJ/m2
MPa
MPa
C
1/K x 10-5
KV/mm
W cm
W
-
X 10-3
-
Test Method
ISO 1183
DSM
DSM
DSM
ISO 1110
ISO 527-1A
ISO 527-1A
ISO 527-1A
ISO 179-1eA
ISO 179-1eA
ISO 178
ISO 178
ISO 75-A
DSM
IEC 243
IEC 93
IEC 93
IEC 250
IEC 250
UL 94
Disclaimer: All information supplied by or on behalf of DSM in relation to its products, whether in the nature of data, recommendations or otherwise, is supported by research and, in good faith, believed reliable, but DSM assumes
no liability and makes no warranties of any kind, express or implied, including, but not limited to, those of TITLE, MERCHANCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE or NON-INFRIGEMENT or any warranty
arising from a course of dealing, usage, or trade practice whatsoever in respect of application processing or use made of the aforementioned information or product. The user assumes all responsibility for the use of all
information provided and shall verify quality and other properties or any consequence from the use of all such information.

PagesPages 1
Télécharger [ TE250F8 ]


Fiche technique recommandé

No Description détaillée Fabricant
TE250F8 DSM Engineering Plastics DSM
DSM
TE250F8 Stanyl DSM
DSM

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche