DataSheetWiki


GVT7C1366A fiches techniques PDF

Cypress Semiconductor - (GVT7xxxx) 256K X 36/512K X 18 Pipelined SRAM

Numéro de référence GVT7C1366A
Description (GVT7xxxx) 256K X 36/512K X 18 Pipelined SRAM
Fabricant Cypress Semiconductor 
Logo Cypress Semiconductor 





1 Page

No Preview Available !





GVT7C1366A fiche technique
( DataSheet : www.DataSheet4U.com )
CY7C1366A/GVT71256C36
CY7C1367A/GVT71512C18
256K x 36/512K x 18 Pipelined SRAM
Features
• Fast access times: 2.5 ns, 3.0 ns, and 3.5 ns
• Fast clock speed: 225 MHz, 200 MHz, 166 MHz, and
150 MHz
• Fast OE access times: 2.5 ns, 3.0 ns, and 3.5 ns
• Optimal for performance (two cycle chip deselect, depth
expansion without wait state)
• 3.3V –5% and +10% power supply
• 3.3V or 2.5V I/O supply
• 5V tolerant inputs except I/Os
• Clamp diodes to VSS at all inputs and outputs
• Common data inputs and data outputs
• Byte Write Enable and Global Write control
• Multiple chip enables for depth expansion:
three chip enables for TA(GVTI)/A(CY) package version
and two chip enables for B(GVTI)/BG(CY) and
T(GVTI)/AJ(CY) package versions
• Address pipeline capability
• Address, data and control registers
• Internally self-timed Write Cycle
• Burst control pins (interleaved or linear burst
sequence)
• Automatic power-down for portable applications
• JTAG boundary scan for B and T package version
• Low profile 119-bump, 14-mm x 22-mm PBGA (Ball Grid
Array) and 100-pin TQFP packages
Functional Description
The Cypress Synchronous Burst SRAM family employs
high-speed, low power CMOS designs using advanced
triple-layer polysilicon, double-layer metal technology. Each
memory cell consists of four transistors and two high valued
resistors.
The CY7C1366A/GVT71256C36 and CY7C1367A/
GVT71512C18 SRAMs integrate 262,144 x 36 and 524,288 x
18 SRAM cells with advanced synchronous peripheral circuitry
and a 2-bit counter for internal burst operation. All synchro-
nous inputs are gated by registers controlled by a
positive-edge-triggered Clock Input (CLK). The synchronous
inputs include all addresses, all data inputs, address-pipelin-
ing Chip Enable (CE), depth-expansion Chip Enables (CE2
and CE2), Burst Control Inputs (ADSC, ADSP, and ADV), Write
Enables (BWa, BWb, BWc, BWd, and BWE), and Global Write
(GW). However, the CE2 Chip Enable input is only available for
the TA(GVTI)/A(CY) package version.
Asynchronous inputs include the Output Enable (OE) and
Burst Mode Control (MODE). The data outputs (Q), enabled
by OE, are also asynchronous.
Addresses and chip enables are registered with either Ad-
dress Status Processor (ADSP) or Address Status Controller
(ADSC) input pins. Subsequent burst addresses can be inter-
nally generated as controlled by the Burst Advance Pin (ADV).
Address, data inputs, and write controls are registered on-chip
to initiate a self-timed WRITE cycle. WRITE cycles can be one
to four bytes wide, as controlled by the write control inputs.
Individual byte write allows an individual byte to be written.
BWa controls DQa. BWb controls DQb. BWc controls DQc.
BWd controls DQd. BWa, BWb, BWc, and BWd can be active
only with BWE being LOW. GW being LOW causes all bytes
to be written. The x18 version only has 18 data inputs/outputs
(DQa and DQb) along with BWa and BWb (no BWc, BWd,
DQc, and DQd).
For the B(GVTI)/BG(CY) and T(GVTI)/AJ(CY) package ver-
sions, four pins are used to implement JTAG test capabilities:
Test Mode Select (TMS), Test Data-In (TDI), Test Clock (TCK),
and Test Data-Out (TDO). The JTAG circuitry is used to serially
shift data to and from the device. JTAG inputs use
LVTTL/LVCMOS levels to shift data during this testing mode of
operation. The TA package version does not offer the JTAG
capability.
The CY7C1366A/GVT71256C36 and CY7C1367A/
GVT71512C18 operate from a +3.3V power supply. All inputs
and outputs are LVTTL compatible.
Selection Guide
7C1366A-225/
71256C36-4.4
7C1367A-225/
71512C18-4.4
Maximum Access Time (ns)
2.5
Maximum Operating Current (mA)
Commercial
570
Maximum CMOS Standby Current (mA)
10
7C1366A-200/
71256C36-5
7C1367A-200/
71512C18-5
3.0
510
10
7C1366A-166/
71256C36-6
7C1367A-166/
71512C18-6
3.5
425
10
7C1366A-150/
71256C36-6.7
7C1367A-150/
71512C18-6.7
3.5
380
10
www.DataSheet4U.com
wwwC.yDparteaSssheSeet4mU.iccoomnductor Corporation • 3901 North First Street • San Jose • CA 95134 • 408-943-2600
June 12, 2001

PagesPages 27
Télécharger [ GVT7C1366A ]


Fiche technique recommandé

No Description détaillée Fabricant
GVT7C1366A (GVT7xxxx) 256K X 36/512K X 18 Pipelined SRAM Cypress Semiconductor
Cypress Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche