DataSheetWiki


FTM-9412P-F10i fiches techniques PDF

Fiberxon - (FTM-9412P-x10xx) SFF GE-PON Px10 ONU Transceiver

Numéro de référence FTM-9412P-F10i
Description (FTM-9412P-x10xx) SFF GE-PON Px10 ONU Transceiver
Fabricant Fiberxon 
Logo Fiberxon 





1 Page

No Preview Available !





FTM-9412P-F10i fiche technique
Aug.9, 2005
SFF GE-PON PX10 ONU Transceiver
FTM-9412P-F10/F10E/F10i/F10U/F10DC
FTM-9412P-K10/K10E/K10i/K10U/K10DC
(IEEE 802.3ah™-2004 1000BASE-PX10-U)
Standard
Members of FlexonTM Family
Features
‹ Single fiber bi-directional data links with symmetric
1.25Gbps upstream and 1.25Gbps downstream
‹ Integrated with micro-optics WDM filter for dual
wavelength Tx/Rx operation at 1310/1490nm
‹ 1310nm burst-mode transmitter with FP laser
‹ 1490nm continuous-mode receiver with PIN-TIA
and optional 1550nm optical signal rejection
‹ Different operating temperature class
0 to 70Standard Class
-20 to 70Extended Class
-40 to 85Industrial Class
‹ 2× 5 /2×1 0 SF F package with SC/UPC pigtail
‹ Single 3.3V power supply
‹ LVPECL compatible data input/output interface
‹ LVTTL transmitter burst-mode control
‹ LVTTL transmitter disable control(2× 10 SFF)
‹ LVTTL transmitter laser failure alarm(2×1 0 S FF )
‹ LVTTL receiver signal-detected indication
‹ Low EMI and excellent ESD protection
‹ Class I laser safety standard IEC-60825 compliant
Applications
‹ Compliant with SFF MSA
‹ Compliant with IEEE Std 802.3ah™ -2004
1000BASE-PX10-U
‹ Compliant with FCC 47 CFR Part 15, Class B
‹ Compliant with FDA 21 CFR 1040.10 and 1040.11,
Class I
Description
2× 5 /2×1 0 SFF GE-PON PX10 ONU transceiver family
is Optical Network Unit (ONU) for IEEE802.3ah™-2004
1000BASE-PX10-U application
The transceiver is the high performance module for
1.25Gbps data link in single fiber by using 1310nm
burst-mode transmitter and 1490nm continuous-mode
receiver with optional 1550nm optical signal rejection.
The transmitter section uses a multiple quantum well
1310nm FP laser and is Classlaser compliant product
according to international safety standard IEC-60825.
The receiver section uses an integrated 1490nm PIN
and preamplifier mounted in an optical header and
limiting post-amplifier IC.
The optical burst output can be enabled by a LVTTL
logic high-level input of TX_BRST. Singal Detected (SD)
output is provided to indicate the detection of an input
optical signal of receiver.
‹ Gigabit Ethernet Passive Optical Networks
For 2× 10 SF F ,optical output can be disabled by a
(GE-PON) – ONU side
LVTTL logic high-level input of TX_DIS, and LAS_nFAIL
‹ Gigabit Ethernet Point-to-Point Bi-directional
is provided to indicate that degradation of the laser.
Transmission
‹ Media Converts for Fiber-In-The-Loop (FITL)
www.DataSheet4U.com
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Doc No: DS3493000-3a
www.DataSheet4U.com
Page 1 of 15
www.DataSheet4U.com

PagesPages 15
Télécharger [ FTM-9412P-F10i ]


Fiche technique recommandé

No Description détaillée Fabricant
FTM-9412P-F10 (FTM-9412P-x10xx) SFF GE-PON Px10 ONU Transceiver Fiberxon
Fiberxon
FTM-9412P-F10DC (FTM-9412P-x10xx) SFF GE-PON Px10 ONU Transceiver Fiberxon
Fiberxon
FTM-9412P-F10E (FTM-9412P-x10xx) SFF GE-PON Px10 ONU Transceiver Fiberxon
Fiberxon
FTM-9412P-F10i (FTM-9412P-x10xx) SFF GE-PON Px10 ONU Transceiver Fiberxon
Fiberxon

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche