DataSheetWiki


FCP0805Hxxxx-J1 fiches techniques PDF

Cornell Dubilier - (FCP Series) Surface Mount Film Capacitors

Numéro de référence FCP0805Hxxxx-J1
Description (FCP Series) Surface Mount Film Capacitors
Fabricant Cornell Dubilier 
Logo Cornell Dubilier 





1 Page

No Preview Available !





FCP0805Hxxxx-J1 fiche technique
Type FCP
Surface Mount Film Capacitors
FCP Surface Mount
Highlights:
Capacitance Range of 100 pF to .22µF
Standard EIA sizes 0603 thru 2416
16 and 50 Vdc Voltage Ratings
Operating Temp. Range: -55 to 125 °C
Capacitance Change from
-55°C to 105°C ± 1.5%
Specifications
Type FCP stacked metallized polyphenylene sulfide (PPS) film capacitors
offer high capacitance per unit volume, stable capacitance and D.F.
over a wide temperature range, and excellent high frequency performance.
Type FCP capacitors conform to standard EIA 0603, 0805, 1206, 1210,
1913 & 2416 surface mount case sizes and are packaged on tape and reel.
Nominal Capacitance Range:
100 pF to 0.22 µF (1 kHz at 5 Vrms)
Capacitance Tolerance:
±5% (J) Standard,±2% (G) Optional
Rated Voltage:
16 and 50 Vdc
Dissipation Factor (Tan δ):
0.6% Max. (1 kHz at 5 Vrms)
Operating Temperature Range:
-55°C to +125°C
(See Voltage derating chart for .12 - .22 µF above 105°C)
Life Test:
Capacitors subjected to 1000 hours of maximum
rated temperature and 125% of the rated voltage
will not have any significant visual damage, the
capacitance will be within ±2% of the initial
measured value, DF will be a maximum of 0.66%,
and IR will be a minimum of 1000 Megohms.
Moisture Resistance:
Capacitors subjected to 1000 hours at 40°C and 90%
- 95% RH and rated voltage will not have any significant
visual damage, will withstand 1.3 times the ratedvoltage
for one minute, the capacitance will be within ±2% of
the initial measured value, DF will be a maximum of
0.9%, and IR will be a minimum of 1000 Megohms.
Dielectric Strength:
175% of rated Vdc for 5 seconds
Insulation Resistance:
3000 MMin. at 20°C, after 60 seconds.
(16 Vdc rated, test 10 Vdc; 50 Vdc rated, test 50 Vdc)
Construction:
Stacked Metallized Polyphenylene Sulfide film.
Resistance to Soldering Heat:
Capacitors subjected to a 260°C reflow soldering for
5 seconds will not have any significant visual damage,
dielectric strength will be as specified, the capacitance
will be within ±3% of the initial measured value,
DF will be a maximum of 0.66%, and IR will be a
minimum of 1000 Megohms.
www.DataSheet4U.com
CORNELL
www.DataSheDetU4UB.coImL I E R
Your Source For Capacitor Solutions
1605 East Rodney French Blvd.
New Bedford, MA 02744
(508) 996-8564, Fax (508) 996-3830
http://www.cornell-dubilier.com
1.069

PagesPages 9
Télécharger [ FCP0805Hxxxx-J1 ]


Fiche technique recommandé

No Description détaillée Fabricant
FCP0805Hxxxx-J1 (FCP Series) Surface Mount Film Capacitors Cornell Dubilier
Cornell Dubilier

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche