DataSheetWiki


JA1B-TMP-xxxx fiches techniques PDF

NAIS - (JA1x-TMx-xxxx) 1 Horse Power Compact Power Relays

Numéro de référence JA1B-TMP-xxxx
Description (JA1x-TMx-xxxx) 1 Horse Power Compact Power Relays
Fabricant NAIS 
Logo NAIS 





1 Page

No Preview Available !





JA1B-TMP-xxxx fiche technique
1 HORSE-POWER
JA-RELAYSCOMPACT POWER RELAYS
30.1
1.185
34.7
FEATURES30.1
1.185
34.7
1.366 1.366 • High switching capacity — 55 A inrush, 15 A steady state
inductive load (1 Form A)
28.5 28.5 • Particularly suitable for air conditioners, dish washers, mi-
1.122 1.122 crowave ovens, ranges, central cleaning systems, copiers,
facsimiles, etc.
• Two types available
mTMP type
TM type
mm inch
"TM" type for direct chassis mounting
"TMP" type for PC board mounting
• TV-rated types available
• TÜV also approved
SPECIFICATIONS .coContact
Arrangement
1 Form, A, 1 Form B, 1 Form C
UInitial contact resistance, max.
(By voltage drop 6 V DC 1 A)
30 m
t4Contact material
Silver alloy
Rating Maximum switching power
e(resistive Maximum switching voltage
load)
Max. switching current
3,750 VA
250 V AC
15A
eMechanical (at 180 cpm.)
5×106
hExpected
life (min.
taSoperations)
Electrical
(at 20 cpm.)
1 Form A (Inrush 55 A,
Steady 15 A 250 VAC
cosϕ = 0.7)
1 Form B, 1 Form C
(15 A 250 VAC,
cosϕ = 1)
105
5×105
Coil
aNominal operating
power
Minimum operating
.Dpower
DC type
AC type
DC type
AC type
1.2 W
1.4 VA (50 Hz)/1.3 VA (60 Hz)
0.77 W
0.90 VA (50 Hz)/0.84 VA (60 Hz)
Remarks
* Specifications will vary with foreign standards certification ratings.
w*1 Measurement at same location as "Initial breakdown voltage" section
*2 Detection current: 10mA
*3 Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981
w*4 Excluding contact bounce time
*5 For the AC coil types, the operate/release time will differ depending on the phase.
w*6Half-wave pulse of sine wave: 11ms; detection time: 10µs
Characteristics
Maximum operating speed
Initial insulation resistance*1
Initial break- Between open contacts
down voltage*2 Between contacts and coil
Initial surge voltage between contacts
and coil*3
Operate time*4
(at 20°C) (at nominal voltage)
Release time (without diode)*4
(at 20°C) (at nominal voltage)
Temperature rise (at 50°C)
(resistive)
Shock resis- Functional*6
tance
Destructive*7
Vibration
resistance
Functional*8
Destructive
Conditions for operation,
transport and storage*9
(Not freezing and condens-
ing at low temperature)
Unit weight
Ambient
temp.
Humidity
20 cpm.
Min. 100 Mat 500 V DC
1,500 Vrms
2,000 Vrms
Min. 5,000 V
Approx. 10 ms*5
Approx. 2 ms*5
Max. 70°C
98 m/s2 {10 G}
980 m/s2 {100 G}
88.2 m/s2 {9 G}, 10 to 55 Hz
at double amplitude of 1.5 mm
88.2 m/s2 {9 G}, 10 to 55 Hz
at double amplitude of 1.5 mm
–10°C to +50°C
+14°F to +122°F
5 to 85%R.H.
Approx. 44 g 1.55 oz
*7 Half-wave pulse of sine wave: 6ms
*8 Detection time: 10µs
*9 Refer to 5. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (Page 24).
TYPICAL APPLICATIONS
Air conditioners, microwave ovens, load
management equipment, copiers, process
control equipment
110
ORDERING INFORMATION .comEx. JA 1a TM DC12V
P
t4UContact
earrangement
Mounting classification
Coil voltage
he1c: 1 Form C
S1a: 1 Form A
ta1b: 1 Form B
TM: Solder Terminal
TMP: Solder Teminal
and PCB Teminal
DC 12, 24 V
AC 12, 24, 115 V
.Da(Notes) 1. For UL/CSA recognized types, add suffix UL/CSA.
www(Notes) 2. Standard packing Carton: 20 pcs.; Case: 200 pcs.
Classification
Nil: Standard type
P: Up-graded contact
rating type
(See next page)

PagesPages 4
Télécharger [ JA1B-TMP-xxxx ]


Fiche technique recommandé

No Description détaillée Fabricant
JA1B-TMP-xxxx (JA1x-TMx-xxxx) 1 Horse Power Compact Power Relays NAIS
NAIS

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche