DataSheetWiki


MAX1213 fiches techniques PDF

Maxim Integrated - 170Msps ADC

Numéro de référence MAX1213
Description 170Msps ADC
Fabricant Maxim Integrated 
Logo Maxim Integrated 





1 Page

No Preview Available !





MAX1213 fiche technique
19-1003; Rev 2; 6/05
.comEVAALVUAAILTAIOBNLEKIT
heet4U 1.8V, 1B2r-oBaidt,b1a7n0dMAspppsliAcaDtCiofnosrGeneral Description
SThe MAX1213 is a monolithic, 12-bit, 170Msps analog-
tato-digital converter (ADC) optimized for outstanding
adynamic performance at high-IF frequencies up to
.D300MHz. The product operates with conversion rates
up to 170Msps while consuming only 788mW.
wAt 170Msps and an input frequency up to 250MHz, the
wMAX1213 achieves a spurious-free dynamic range
w(SFDR) of 72.9dBc. Its excellent signal-to-noise ratio
(SNR) of 65.8dB at 10MHz remains flat (within 2dB) for
minput tones up to 250MHz. This ADC yields an excellent
olow-noise floor of -68dBFS, which makes it ideal for
wideband applications such as cable head-end
.creceivers and power-amplifier predistortion in cellular
base-station transceivers.
The MAX1213 requires a single 1.8V supply. The analog
Uinput is designed for either differential or single-ended
operation and can be AC- or DC-coupled. The ADC also
t4features a selectable on-chip divide-by-2 clock circuit,
which allows the user to apply clock frequencies as high
as 340MHz. This helps to reduce the phase noise of the
einput clock source. A low-voltage differential signal
e(LVDS) sampling clock is recommended for best perfor-
mance. The converter’s digital outputs are LVDS com-
hpatible and the data format can be selected to be either
two’s complement or offset binary.
SThe MAX1213 is available in a 68-pin QFN package
with exposed paddle (EP) and is specified over the
taindustrial (-40°C to +85°C) temperature range.
See the Pin-Compatible Versions table for a complete
aselection of 8-bit, 10-bit, and 12-bit high-speed ADCs in
this family.
.DApplications
Base-Station Power-Amplifier Linearization
wCable Head-End Receivers
Wireless and Wired Broadband Communication
wCommunications Test Equipment
w t4U.comRadar and Satellite Subsystems
Features
o 170Msps Conversion Rate
o Low Noise Floor of -68dBFS
o Excellent Low-Noise Characteristics
SNR = 65.8dB at fIN = 65MHz
SNR = 64.5dB at fIN = 250MHz
o Excellent Dynamic Range
SFDR = 76.5dBc at fIN = 65MHz
SFDR = 72.9dBc at fIN = 250MHz
o 59.5dB NPR for fNOTCH = 28.8MHz and a Noise
Bandwidth of 50MHz
o Single 1.8V Supply
o 788mW Power Dissipation at fSAMPLE = 170MHz
and fIN = 65MHz
o On-Chip Track-and-Hold Amplifier
o Internal 1.23V-Bandgap Reference
o On-Chip Selectable Divide-by-2 Clock Input
o LVDS Digital Outputs with Data Clock Output
o MAX1213 EV Kit Available
Ordering Information
PART
TEMP RANGE
MAX1213EGK -40°C to +85°C
*EP = Exposed paddle.
PIN-PACKAGE
68 QFN-EP*
PART
MAX1121
MAX1122
MAX1123
MAX1124
MAX1213
MAX1214
MAX1215
Pin-Compatible Versions
RESOLUTION
(BITS)
8
10
10
10
12
12
12
SPEED GRADE
(Msps)
250
170
210
250
170
210
250
SheePin Configuration appears at end of data sheet.
.Data________________________________________________________________ Maxim Integrated Products 1
wwFor pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
w1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

PagesPages 20
Télécharger [ MAX1213 ]


Fiche technique recommandé

No Description détaillée Fabricant
MAX121 308Ksps ADC with DSP Interface and 78dB SINAD Maxim Integrated
Maxim Integrated
MAX1211 IF Sampling ADC Maxim Integrated
Maxim Integrated
MAX1213 170Msps ADC Maxim Integrated
Maxim Integrated
MAX1213 250Msps Analog-to-Digital Converter Maxim Integrated Products
Maxim Integrated Products

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche