|
|
Número de pieza | ILC555 | |
Descripción | Timer | |
Fabricantes | IK Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ILC555 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! TECHNICAL DATA
CMOS general purpose timer
ILC555
The ILC555 is CMOS RC timers providing significantly improved
performance over the standard SE/NE555 and 355 timers, while at the
same time being direct replacements for those devices in most applications.
Improved parameters include low supply current, wide operating supply
voltage range, low THRESHOLD, TRIGGER and RESET currents, no
crowbarring of the supply current during output transitions, higher
frequency performance and no requirement to decouple CONTROL
VOLTAGE for stable operation.
Specifically, the ILC555 is stable controller capable of producing
maccurate time delays of frequencies.
.co• Exact equivalent in most cases for SE/NE555.
U• Low Supply Current.
• High speed operation – 500 kHz guaranteed.
t4• Wide operation supply voltage range – 2 to 18 volts.
• Timing from microseconds through hours.
e• Operates in both astable and monostable modes.
• Adjustable duty cycle.
e• High output source/sink driver can drive TTL/CMOS
ORDERING INFORMATION
ILC555N Plastic
ILC555D SOIC
TA = -20° to 70° C for all packages.
PIN ASSIGNMENT
taSh GND 01
TRIGGER 02
a OUTPUT 03
www.D RESET 04
ILC555N
08 VCC
07 DISCHARGE
06 THRESHOLD
05
CONTROL
VOLTAGE
www.DataS1heet4U.com
1 page A
85
B
14
N SUFFIX PLASTIC DIP
(MS – 001BA)
FL
C
-T- SEATING
PLANE
N
GK
D
M
0.25 (0.010) M T
J
H
NOTES:
1. Dimensions “A”, “B” do not include mold flash or protrusions.
Maximum mold flash or protrusions 0.25 mm (0.010) per side.
ILC555
Symbol
A
B
C
D
F
G
H
J
K
L
M
N
Dimension, mm
MIN MAX
8.51 10.16
6.1 7.11
5.33
0.36 0.56
1.14 1.78
2.54
7.62
0° 10°
2.92 3.81
7.62 8.26
0.2 0.36
0.38
D SUFFIX SOIC
(MS - 012AA)
A
85
H BP
1 G4
C
-T-
D
SEATING
K PLANE
J
0.25 (0.010) M T C M
R x 45
F
NOTES:
1. Dimensions A and B do not include mold flash or protrusion.
2. Maximum mold flash or protrusion 0.15 mm (0.006) per side
for A; for B ‑ 0.25 mm (0.010) per side.
Dimension, mm
Symbol MIN
MAX
A 4.8 5
B 3.8 4
C 1.35 1.75
D 0.33 0.51
F 0.4 1.27
G
MH
1.27
5.72
J 0° 8°
K 0.1 0.25
M 0.19 0.25
P 5.8 6.2
R 0.25 0.5
5
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet ILC555.PDF ] |
Número de pieza | Descripción | Fabricantes |
ILC555 | Timer | IK Semiconductor |
ILC556N | Dual Timer | IK Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |