DataSheetWiki


PBL3766 fiches techniques PDF

Ericsson Components - Subscriber Line Interface Circuit

Numéro de référence PBL3766
Description Subscriber Line Interface Circuit
Fabricant Ericsson Components 
Logo Ericsson Components 





1 Page

No Preview Available !





PBL3766 fiche technique
September 1997
PBL 3766, PBL 3766/6
Subscriber Line
Interface Circuit
Description
The PBL 3766 Subscriber Line Interface Circuit (SLIC) is a monolithic integrated
circuit, manufactured in 75 V bipolar technology. The PBL 3766 SLIC facilitates the
design of cost effective, high performance on-premises (ONS) analog line interface
cards for PABX systems and terminal adapters. Small package size and few
required external components result in a miniaturized design.
The PBL 3766 programmable, constant current loop feed system can operate with
battery supply voltages between -24 V and -58 V.
The SLIC incorporates loop current and ring trip detection functions as well as a
ring relay driver.
The two- to four-wire and four- to two-wire voice frequency (vf) signal conversion,
i.e. the hybrid function, is provided by the SLIC in conjunction with either a conven-
tional or a programmable CODEC/filter.
The PBL 3766 package is a 22 pin, plastic dual-in-line (batwing) or a 28-pin, plastic
j-leaded chip carrier (PLCC).
The differences between PBL 3766 and PBL 3766/6 are the specifications for
balance, output offset voltage, and insertion loss.
w DT 23/20
wwTIPX 27/21
HPT 20/15
.DHPR 21/16
aRINGX 28/22
taVCC 4/2
SVEE 18/13
Two-wire
Interface
hVBAT
eet4GND
3, 6, 10, 17, 24/
5, 6, 17, 18
2/1
Ring Trip
Detector
Line Feed
Controller
and
Longitudinal
Signal
Suppression
Loop Current
Detector
VF Signal
Transmission
Ring Relay
Driver
Input/Output
Decoder and
Control
U.comFigure 1. Block diagram. Pin numbers PLCC/DIP.
5/3 RINGRLY
13/10 C1
12/9 C2
9/7 E0
11/8 DET
14/11 RDC
7/4 RSG
22/19 RD
19/14 VTX
16/12 RSN
Key Features
• Low cost
• Few external components
• Programmable, constant current loop
feed
• Line feed characteristics independent
of battery supply variations
• -24 V to -58 V battery supply voltage
range
• Detectors
– programmable loop current detector
– ring trip detector
• Ring relay driver
• Hybrid function with conventional or
programmable CODEC/filters
• Line terminating impedance, complex
or real, set by a simple external
network or controlled by a
programmable CODEC/filter
• Idle noise typ. -83 dBmp, typ. 7 dBrnC
• Low on-hook power dissipation:
20 mW @ -28 V, 35 mW @ -48 V
• Tip-ring open circuit state for
subscriber loop power denial
• On-hook transmission
4-1

PagesPages 18
Télécharger [ PBL3766 ]


Fiche technique recommandé

No Description détaillée Fabricant
PBL3762 Subscriber Line Interface Circuit Ericsson Components
Ericsson Components
PBL3764 SUBSCRIBER LINE INTERFACE CIRCUIT Ericsson
Ericsson
PBL3766 Subscriber Line Interface Circuit Ericsson Components
Ericsson Components

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche