|
|
Número de pieza | IN74VHCT08 | |
Descripción | Hex Inverter | |
Fabricantes | IK Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de IN74VHCT08 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! Quad 2-Input AND Gate
IN74VHCT08 is high-speed logic IC made by CMOS
technology and designed for use in high-performance
calculating systems with a wide supply voltage range.
As for operation speed, IN74VHCT08 can be compared
with equivalent bipolar ICs based on Schottky TTL and two
times surpasses ICs of IN74НС series.
IN74VHCT08 tolerates operation under conditions when
voltage on input & output is exceeded up to 7V without
affecting characteristics and IC reliability. This possibility
allows to use IN74VHCT08 in radio-electronic devices for
interfacing with supply voltages 5V and 3V, eliminate IC
failure under supply voltage source emergency outage.
Use of output edge shaping block in the microcircuit
allows to reduce noise amplitude of noises when switching
outputs into the same state simultaneously.
Input levels of IN74VHCT08 are compatible with TTL level
and output levels with CMOS levels.
TECHNICAL DATA
IN74VHCT08
ORDERING INFORMATION
IN74VHCT08N Plastic
IN74VHCT08D SOIC
TA = -40° to 85° C for all
packages
Features :
• Supply voltage range 4.5 to 5.5 V.
• Output current 8 mA.
• Low consumption current: 0.2 mkA (typical value) at Та = 25 °С.
• Latchup current not less than 300 mA at Та = 85 °С.
• Tolerable value of static potential not less than 2000 V as per human body model
(HBM) and not less than 200 V as per machine model (ММ).
• Ambient operation temperature minus 40 to plus 85 °С.
• Balanced signal propagation delay.
w • Ensures voltage exceeding mode on input
w • Low noise level at the simultaneous switching of outputs in the same state:
w VOLP = 0.8 V (max).
.• For pins and functions, compatible with IN74HCT08.
DataSheet4U.com.
1
1 page IN74VHCT08
AC electrical characteristics (tLH = tHL = 3.0 ns)
Symbol
Parameter
Test conditions VCC, V
CL,
pF
tPHL, tPLH Propagation delay time VIL = 0 V, 5.0 ± 0.5 15
when switching "on", VIН=3.0 V,
50
"off"
Value
25 °C
–40
to 85 °C
min max min max
– 6.9 – 8.0
– 7.9 – 9.0
Unit
ns
CI Input capacity
CРD Dynamic capacity
-
VI = 0 V orVCC
5.0
5.0
10
36
Noise characteristics (CL = 50 pF)
Symbol
VOLP
VOLV
Parameter
VCC, V
Positive noise of low output voltage 5.0
Negative noise of low output 5.0
voltage
VIHD Input dynamic high voltage
VILD Input dynamic low voltage
5.0
5.0
Value
min max
- 0.8
-0.8 -
2.0
0.8
pF
Unit
V
- Time diagram of input and output pulses
tL
H
0.9
A,
B 0.5
0.1
t PH
L
tH
L
0.9
0.5
0.1
tPL
H
0.5
Y
0.5
VCC
GN
D
VCC
0V
5
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet IN74VHCT08.PDF ] |
Número de pieza | Descripción | Fabricantes |
IN74VHCT00 | Quad 2-Input NAND Gate | IK Semiconductor |
IN74VHCT02 | Quad 2-Input NOR Gate | IK Semiconductor |
IN74VHCT08 | Hex Inverter | IK Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |