|
|
Número de pieza | LD45-xxx | |
Descripción | (LD4xx) DC/DC CONVERTER | |
Fabricantes | Wall Industries | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LD45-xxx (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
No Preview Available ! L SERIES
PRODUCT FEATURES
Low Ripple, Regulated, Single and Dual Output
• Up to 7.5Watts Output Power
• High Input/Output Isolation
• Low Output Ripple
• Continuous Short Circuit Protection
• Pi-Input Filter
• Low Profile Package
THE L SERIES FROM WALL INDUSTRIES
The L Series features a low profile package of 2.0 x 2.0 x
0.40” with output power to 7.5watts. This series has excellent
line and load regulation, input filtering, and low output ripple,
as well as low input reflected ripple. Specifications include
high I/O isolation (500VDC), low output ripple (<50mV P-P)
and current limiting/thermal shutdown.
TO 7.5 WATTS
SPECIFICATIONS: L SERIES
All specifications apply @ +25 C ambient unless otherwise
noted.
INPUT SPECIFICATIONS
GENERAL SPECIFICATIONS
Input Voltage Range...............5, 12, 24, 28, 28VDC ±10%
Efficiency...........................................................65% typical
Nominal Input........................................5, 12, 24, 28 VDC
Input Filter......................................................Pi-Input Filter
w OUTPUT SPECIFICATIONS
wOutput Current....................................................see table
wVoltage Tolerance.................................................5% max.
Thermal Shutdownapprox. +100°C case (7.5W units only)
.DLine Regulation .....................................................±0.05%
a....................................................................3 & 5W 0.3%
tLoad Regulation .....................................................±0.5%
aShort Circuit Protection.......................linear current limiting
SRipple/Noise (20MHz BW).................................50mV p-p
heet4Over Voltage Protection.......................................see table
Isolation Voltage (input to output)......................500VDC min.
Isolation Resistance (input to output).................100 MOhms
Switching Frequency.......................................50kHz typical
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature..........................-25 to +85°C (case)
Storage Temperature.....................................-55 to +100°C
Humidity (non-condensing).............................20 - 95% R.H.
PHYSICAL SPECIFICATIONS
Weight......................................................................2.3 oz.
Case Material........................................Black coated metal,
...................................................non-conductive baseplate
Shielding connections....................Six-Sided Shielded case
Due to advances in technology, specifications subject to
change without notice.
7/14/02
1 U.com603 778 2300 . .WWW WALLINDUSTRIES COM
1 page |
Páginas | Total 3 Páginas | |
PDF Descargar | [ Datasheet LD45-xxx.PDF ] |
Número de pieza | Descripción | Fabricantes |
LD45-xxx | (LD4xx) DC/DC CONVERTER | Wall Industries |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |