|
|
PDF IN74VHC00 Data sheet ( Hoja de datos )
| Número de pieza | IN74VHC00 | |
| Descripción | Quad 2-Input NAND Gate | |
| Fabricantes | IK Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de IN74VHC00 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
Quad 2-Input NAND Gate
IN74VHC00 is high-speed logic IC made by CMOS
technology and designed for use in high-performance
calculating systems with a wide supply voltage range.
As for operation speed, IN74VHC00 can be compared
with equivalent bipolar ICs based on Schottky TTL and two
times surpasses ICs of IN74НС series.
IN74VHC00 tolerates operation under conditions when
voltage on input is exceeded up to 7V without affecting
characteristics and IC reliability. This possibility allows to
use IN74VHC00 in radio-electronic devices for interfacing
with supply voltages 5V and 3V, eliminate IC failure under
supply voltage source emergency outage.
Use of output edge shaping block in the microcircuit
allows to reduce noise amplitude of noises when switching
outputs into the same state simultaneously.
Input and output levels of IN74VHC00 are compatible with
CMOS levels
TECHNICAL DATA
IN74VHC00
ORDERING INFORMATION
IN74VHC00N Plastic
IN74VHC00D SOIC
TA = -40° to 85° C for all
packages
Features:
• Supply voltage range 2.0 to 5.5 V.
• Output current 8 mA.
• Low consumption current: 0.2 mkA (typical value) at Та = 25 °С.
• Latchup current not less than 300 mA at Та = 85 °С.
• Tolerable value of static potential not less than 2000 V as per human body model
(HBM) and not less than 200 V as per machine model (ММ).
• Ambient operation temperature minus 40 to plus 85 °С.
• Balanced signal propagation delay.
• Ensures voltage exceeding mode on input
• Low noise level at the simultaneous switching of outputs in the same state: VOLP = 0.8
V (max).
m• For pins and functions, compatible with IN74НС00.
www.datasheet4u.co.
1
1 page  
IN74VHC00
AC electrical characteristics (tLH = tHL = 3.0 ns)
Symbol
Parameter
Test
conditi VCC, V
ons
Value
CL,
pF
25 °C
–40
to 85 °C
min max min max
tPHL, tPLH Propagation delay time Figure 3.3 ± 0.3 15
when switching "on", 2
50
- 7.9 - 9.5
11.4 13.0
"off"
5.0 ± 0.5 15 5.5 6.5
50 7.5 8.5
CI Input capacity
- 5.0
10 -
CРD Dynamic capacity
VI = 0
V
5.0
38 -
orVCC
Unit
ns
pF
Noise characteristics (CL = 50 pF)
Symbol
VOLP
VOLV
Parameter
VCC, V
Positive noise of low output voltage 5.0
Negative noise of low output 5.0
voltage
VIHD Input dynamic high voltage
VILD Input dynamic low voltage
5.0
5.0
Value
min max
- 0.8
-0.8 -
3.5 -
- 1.5
Unit
V
5
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet IN74VHC00.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| IN74VHC00 | Quad 2-Input NAND Gate | IK Semiconductor |
| IN74VHC02 | Quad 2-Input NOR Gate | IK Semiconductor |
| IN74VHC08 | Hex Inverter | IK Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |