DataSheetWiki


DF30FC-xxx fiches techniques PDF

HRS - 0.4mm Pitch / 0.9mm Height / Board-to-board Connectors

Numéro de référence DF30FC-xxx
Description 0.4mm Pitch / 0.9mm Height / Board-to-board Connectors
Fabricant HRS 
Logo HRS 





1 Page

No Preview Available !





DF30FC-xxx fiche technique
0.4 mm Pitch, 0.9 mm Height, Board-to-Board / Board-to-FPC Connectors
DF30 Series
Extremely small size
(0.90)
(4.56)(3.76)
(0.40)
Header
(10.22)
Receptacle
40 positions shown
sOverview
Continuous miniaturization and increased component
density on PCB created demand for extremely low profile
connectors. This series is addition of a new extremely low
profile connectors to Hirose's wide range of high reliability
board-to-board/board-to-FPC connection solutions.
sFeatures
1. Contact reliability
Concentration of the contact's normal forces at the single
point assures good contact wipe and electrical reliability,
while confirming the fully mated condition with a definite
tactile click.
2. Self alignment
Recognizing the difficulties of mating extremely small
connectors in limited spaces the connectors will self align
in horizontal axis within 0.3 mm.
3. Automatic board placement
Packaged on tape-and-reel the plug and headers have
sufficiently large flat areas to allow pick-up with vacuum
nozzles of automatic placement equipment.
4. Variety of contact positions and styles
Available in standard contact positions of: 20, 22, 24, 30,
34, 40, 50, 60, 70 and 80 with and without metal fittings.
Addition of metal fittings does not affect external
dimensionsof the connectors.
mSmaller contact positions are also available.
.co5. Support for continuity test connector
Connectors which have increased insertion and removal
udurability are available for continuity tests. Contact your
t4Hirose sales representative for details.
eesApplications
hCellular phones, PDA's, mobile computers, digital
scameras, digital video cameras, and other devices
tademanding high reliability connections in extremely
www.dalimited spaces.
s Low profile
s Increased mated retention
s High contact reliability
Header
DF30*-*DP-0.4V
0.9mm
Receptacle
DF30*-*DS-0.4V
Protrusion improves mated retention
Self alignment
0.3mm
2004.10
1

PagesPages 11
Télécharger [ DF30FC-xxx ]


Fiche technique recommandé

No Description détaillée Fabricant
DF30FC-xxx 0.4mm Pitch / 0.9mm Height / Board-to-board Connectors HRS
HRS

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche