DataSheetWiki


EM4223 fiches techniques PDF

EM Microelectronic - Read-only UHF Radio Frequency Identification Device according to ISO IEC 18000-6

Numéro de référence EM4223
Description Read-only UHF Radio Frequency Identification Device according to ISO IEC 18000-6
Fabricant EM Microelectronic 
Logo EM Microelectronic 





1 Page

No Preview Available !





EM4223 fiche technique
EM MICROELECTRONIC - MARIN SA
EM4223
Read-only UHF Radio Frequency Identification
Device according to ISO IEC 18000-6
Description
The EM4223 chip is used in UHF passive read-only
transponder applications. The chip derives its operating
power from an RF beam transmitted by the reader, which is
received and rectified by the chip. It transmits its factory-
programmed code back to the reader by varying the amount
of energy that is reflected from the chip antenna circuit
(passive backscatter modulation).
The air interface communication protocol is implemented
according to ISO18000-6 type A.
The code structure supports the effort of EPCglobal, Inc. as
an industry accepted standard.
It additionally incorporates the Fast Counting Supertag™
protocol for applications where the fast counting of large tag
populations is required.
The chip is frequency agile, and can be used in the range of
800 MHz to 2.5GHz for RF propagating field applications.
Typical Applications
q Supply chain management (SCM)
q Tracking and tracing
q Asset control
q Licensing
q Auto-tolling
Pin Assignment
3
EM4223
12
Features
q Air interface is ISO18000-6 type A compliant
q Supports EAN•UCC and EPC™ data structures as
defined by the Auto-ID center
q Supports Fast Counting Supertag™ mode
q 128 bit user memory license plate
q Group select by means of ‘Application Family Identifier’
(AFI) according to ISO
q Fast reading of user data during arbitration (no need to
first take an inventory)
q Frequency independent: Typically used at 862 - 870
MHz, 902 - 950 MHz and 2.45 GHz
q Low voltage operation - down to 1.0 V
q Low power consumption
q Cost effective
q -40 to +85 °C operating temperature range
Benefits
q Numbering scheme according to international
standards
q Operates worldwide according to the local radio
regulation
q Ideal for applications where long range and high-speed
item identification is required
Pad No
1
2
3
Name
A
Vss
Vdd
Function
Connection to antenna (positive)
Connection to antenna (negative)
Positive connection (optional use)
Chip design is a joint development with RFIP Solutions Ltd.
EM Microelectronic-Marin SA cannot assume responsibility for use of any circuitry described other than circuitry entirely embodied in an EM
Microelectronic-Marin SA product. EM Microelectronic-Marin SA reserves the right to change the circuitry and specifications without notice at
any time. You are strongly urged to ensure that the information given has not been superseded by a more up-to-date version.
Copyright 2004, EM Microelectronic-Marin SA
Subject to change without notice
Rev. B, 02/04
Phone: +41.32.755-5111, Fax: +41.32.755-5403
www.emmicroelectronic.com

PagesPages 1
Télécharger [ EM4223 ]


Fiche technique recommandé

No Description détaillée Fabricant
EM4222 Read-Only UHF Identification Device EM Microelectronic
EM Microelectronic
EM4223 Read-only UHF Radio Frequency Identification Device according to ISO IEC 18000-6 EM Microelectronic
EM Microelectronic
EM422Mxxxx-xx 64Mb SDRAM Eorex
Eorex

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche