DataSheetWiki


OP804TX fiches techniques PDF

OPTEK Technologies - (OP803TX - OP805TX) Hi-Reliability NPN Sil icon Phototransistor

Numéro de référence OP804TX
Description (OP803TX - OP805TX) Hi-Reliability NPN Sil icon Phototransistor
Fabricant OPTEK Technologies 
Logo OPTEK Technologies 





1 Page

No Preview Available !





OP804TX fiche technique
Product Bulletin OP803TX
September 1996
Hi-Reliability NPN Silicon Phototransistor
Types OP803TX/TXV, OP804TX/TXV, OP805TX/TXV
Features
High reliability screening patterned
after MIL-PRF-19500
Each lot subjected to Group A & B Lot
Acceptance
Lensed for high sensitivity
Mechanically and spectrally matched
to the OP235TX/TXV and
OP236TX/TXV series IREDs
Description
Each device in the OP803, OP804 and
OP805TX/TXV series consists of a high
reliability NPN phototransistor mounted in
a lensed, hermetically sealed, TO-18
package. All devices are 100% screened
per Table II of MIL-PRF-19500. Typical
screening and lot acceptance tests are
provided on page 13-4.
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65o C to +150o C
Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55o C to +125o C
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering
iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240o C(1)
Collector-Emitter Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Collector-Base Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Emitter-Base Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 V
Emitter-Collector Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 V
Power Dissipation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 mW(2)
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering.
(2) Derate linearly 2.5 mW/o C above 25o C.
The OP803, OP804 and OP805 TX/TXV
series lensing creates an acceptance half
angle of 12o<D> measured from the optical
axis to the half power point. The series
can be matched with either a solid state
infrared source, such as the OP235 and
OP236 TX/TXV series IREDs, or can be
used to sense infrared content in a visible
light source, such as a tungsten bulb or
sunlight for automatic brightness control.
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
13-34
(972) 323-2200
Fax (972) 323-2396

PagesPages 2
Télécharger [ OP804TX ]


Fiche technique recommandé

No Description détaillée Fabricant
OP804TX (OP803TX - OP805TX) Hi-Reliability NPN Sil icon Phototransistor OPTEK Technologies
OPTEK Technologies

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche