|
|
PDF 2KS160 Data sheet ( Hoja de datos )
| Número de pieza | 2KS160 | |
| Descripción | (2KSxxx) Peel A Way Low Insertion Force PGA Sockets | |
| Fabricantes | Advanced Interconnections | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 2KS160 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
Low Insertion Force
Peel-A-Way® PGA Sockets
5 Energy Way, P.O. Box 1019, West Warwick, RI 02893 USA Tel. 800-424-9850/401-823-5200 • Fax 401-823-8723 • Email [email protected] • Internet http://www.advintcorp.com
Peel-A-Way® Low Insertion Force PGA Sockets
.005
(.13)
Polyimide Film
Features:
How To Order
• Disposable carriers peel away after
soldering.
• Peel-A-Way® tabs and full grid wafer
supplied on all Peel-A-Way® PGA sockets.
• Maximum air flow under PGA for greater
cooling.
• Better flux rinse and cleaning.
• Allows inspection of solder joints on both
sides of PCB.
• Lowest profile with use of type -210
terminal.
1 KS 068 -85 T G
Footprint Dash #
If Applicable*
Body Type
KS - 2.5 oz.(70.85 g) avg. insertion force
KIS - 1 oz.(28.34 g) avg. insertion force
Contact Plating
G - Gold
T - Tin-Lead
Terminal Plating
G - Gold
T - Tin-Lead
Number of Pins
004 to 484
*See pages 37 - 64
for PGA footprints
Terminal Type
See next page
for terminal types
• Peel-A-Way® disposable socket terminal
carrier available in any configuration shown
or custom designed to meet your
specifications.
Terminals and Contacts:
Terminal: Brass - Copper Alloy (C36000)
ASTM-B-16
Polyimide Film
Polyimide Film
Peel away
after soldering
to PCB.
Contact: Beryllium Copper (C17200)
ASTM-B-194
Solder Preform:
63% Tin, 37% Lead
Plating:
Terminal: Gold over Nickel or
Tin-Lead over Nickel
Solder fillets visible both sides
for inspection and cleaning.
How To Use:
1. Place socket in PCB.
2. Send PCB and socket through soldering operation.
3. Peel away polyimide film carrier.
PCB
Contact: Gold over Nickel or
Sealant Options
Tin-Lead over Nickel
mGold per MIL-G-45204
oTin-Lead per MIL-P-81728
.cNickel per QQ-N-290
t4uBody Material:
KS/KIS - Polyimide Film
e-269˚C to 400˚C (-452˚F to 752˚F)
RTV
Seal
she RTV Sealed
ta To order: Add RTV to end of part #
a Note: RTV not available with HCS or HCIS Insulators
Tape Sealed
To order: Add 3M to end of part #
www.dPage 34
Peel-A-Way® covered by patent rights issued and/or pending.
Products shown covered by patents issued and/or pending. Specifications subject to change without notice.
inch/(mm)
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet 2KS160.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 2KS160 | (2KSxxx) Peel A Way Low Insertion Force PGA Sockets | Advanced Interconnections |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |