|
|
PDF PC817X Data sheet ( Hoja de datos )
| Número de pieza | PC817X | |
| Descripción | Dip 4Pin General Purpose Photocoupler | |
| Fabricantes | Sharp | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PC817X (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
|
No Preview Available !
PC817X Series
∗4-channel package type is also available.
(model No. PC847X Series)
PC817X Series
DIP 4pin General Purpose
Photocoupler
■ Description
PC817X Series contains an IRED optically coupled
to a phototransistor.
It is packaged in a 4pin DIP, available in wide-lead
spacing option and SMT gullwing lead-form option.
Input-output isolation voltage(rms) is 5.0kV.
Collector-emitter voltage is 80V(*) and CTR is 50%
to 600% at input current of 5mA.
■ Features
1. 4pin DIP package
2. Double transfer mold package (Ideal for Flow Solder-
ing)
3. High collector-emitter voltage (VCEO:80V(*))
4. Current transfer ratio (CTR : MIN. 50% at IF=5 mA,
VCE=5V)
5. Several CTR ranks available
6. High isolation voltage between input and output
(Viso(rms) : 5.0 kV)
(*) Up to Date code "P7" (July 2002) VCEO : 35V.
From the production Date code "J5" (May 1997) to "P7" (July
2002), however the products were screened by BVCEO≥70V.
■ Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. PC817)
2. Package resin : UL flammability grade
(94V-0)
■ Applications
1. I/O isolation for MCUs (Micro Controller Units)
2. Noise suppression in switching circuits
3. Signal transmission between circuits of different po-
tentials and impedances
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D2-A03101EN
1 Date Sep. 30. 2003
© SHARP Corporation
1 page  
PC817X Series
■ Model Line-up
Lead Form
Package
Model No.
Through-Hole
PC817X
PC817X1
PC817X2
PC817X3
PC817X4
PC817X5
PC817X6
PC817X7
PC817X8
PC817X9
PC817X0
Wide Through-Hole
Sleeve
100pcs/sleeve
PC817XF
PC817XF1
PC817XF2
PC817XF3
PC817XF4
PC817XF5
PC817XF6
PC817XF7
PC817XF8
PC817XF9
PC817XF0
SMT Gullwing
Wide SMT Gullwing
Taping
2 000pcs/reel
Rank mark
IC [mA]
(IF=5mA, VCE=5V, Ta=25˚C)
PC817XI PC817XP PC817XFP with or without
2.5 to 30.0
PC817XI1 PC817XP1
−
A
4.0 to 8.0
PC817XI2 PC817XP2
−
B 6.5 to 13.0
PC817XI3 PC817XP3
−
C 10.0 to 20.0
PC817XI4 PC817XP4
−
D 15.0 to 30.0
PC817XI5 PC817XP5
−
A or B
4.0 to 13.0
PC817XI6 PC817XP6
−
B or C
6.5 to 20.0
PC817XI7
PC817XI8
PC817XI9
PC817XI0
PC817XP7
PC817XP8
PC817XP9
PC817XP0
−
−
−
−
C or D
A, B or C
B, C or D
A, B, C or D
10.0 to 30.0
4.0 to 20.0
6.5 to 30.0
4.0 to 30.0
Please contact a local SHARP sales representative to inquire about production status and Lead-Free options.
Sheet No.: D2-A03101EN
5
5 Page 
PC817X Series
● Cleaning instructions
Solvent cleaning:
Solvent temperature should be 45˚C or below Immersion time should be 3minutes or less
Ultrasonic cleaning:
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Recommended solvent materials:
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol
In case the other type of solvent materials are intended to be used, please make sure they work fine in ac-
tual using conditions since some materials may erode the packaging resin.
● Presence of ODC
This product shall not contain the following materials.
And they are not used in the production process for this device.
Regulation substances:CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
Sheet No.: D2-A03101EN
11
11 Page | ||
| Páginas | Total 15 Páginas | |
| PDF Descargar | [ Datasheet PC817X.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PC817 | DEVICE SPECIFICATION FOR PHOTOCOUPLER |  Sharp Electrionic Components |
| PC817 | 4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER |  Galaxy Microelectronics |
| PC817 | High Density Mounting Type Photocoupler | Sharp |
| PC817 | High Density Mounting Type Photocoupler |  Kexin |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |