DataSheetWiki


UDN2936W fiches techniques PDF

Allegro MicroSystems - 3-PHASE BRUSHLESS DC MOTOR CONTROLLER/DRIVER

Numéro de référence UDN2936W
Description 3-PHASE BRUSHLESS DC MOTOR CONTROLLER/DRIVER
Fabricant Allegro MicroSystems 
Logo Allegro MicroSystems 





1 Page

No Preview Available !





UDN2936W fiche technique
2936-120
ABSOLUTE MAXIMUM RATINGS
at TJ +150°C
Supply Voltage, VBB . . . . . . . . . . . . . . . 45 V
Output Current, IOUT
(continuous) . . . . . . . . . . . . . . . . ±2.0 A
(peak) . . . . . . . . . . . . . . . . . . . . . ±3.0 A
Input Voltage Range, VIN . . . -0.3 V to 15 V
Threshold Voltage, VTHS . . . . . . . . . . . . 15 V
Package Power Dissipation,
PD . . . . . . . . . . . . . . . . . . . See Graph
Operating Temperature Range,
TA . . . . . . . . . . . . . . . . -20°C to +85°C
Storage Temperature Range,
TS . . . . . . . . . . . . . . . . -55°C to +150°C
Note: Output current rating may be limited by
duty cycle, ambient temperature, and heat
sinking. Under any set of conditions, do not
exceed the specified peak current and a junction
temperature of +150°C.
3-PHASE BRUSHLESS DC MOTOR
CONTROLLER/DRIVER
Combining logic and power, the UDN2936W-120 provides com-
mutation and drive for three-phase brushless dc motors. Each of the
three outputs are rated at 45 V and ±2 A (±3 A peak), and include
internal ground clamp and flyback diodes. The driver also features
internal commutation logic, PWM current control, and thermal shut-
down protection.
The UDN2936W-120 is compatible with single-ended digital or
linear Hall effect sensors. The commutating logic is programmed for
120° electrical separation. The UDN2936W-120 can replace the
original UDN2936W (60° electrical separation) by simply adding an
inverter at the H2 input. Current control is accomplished by sensing
current through an external sense resistor and pulse-width modulating
the source drivers. Voltage thresholds and hysteresis can be externally
set by the user. If desired, internal threshold and hysteresis defaults
(300 mV, 7.5 percent) can be used. The UDN2936W-120 also includes
braking and direction control. Internal protection circuitry prevents
crossover current when braking or changing direction.
The UDN2936W-120 is also available for operation between -40°C
and +85°C. To order, change the prefix from ‘UDN’ to ‘UDQ’.
For maximum power-handling capability, the UDN2936W-120 is
supplied in 12-pin single in-line power-tab package. An external heat
sink may be required for high-current applications. The tab is at
ground potential and needs no insulation.
FEATURES
I 10 V to 45 V Operation
I ±3 A Peak Output Current
I Internal Clamp Diodes
I Internal PWM Current Control
I 120° Commutation Decoding Logic
I Thermal Shutdown Protection
I Compatible with Single-Ended or Differential Hall-Effect Sensors
I Braking and Direction Control
Always order by complete part number, e.g., UDN2936W-120 .

PagesPages 10
Télécharger [ UDN2936W ]


Fiche technique recommandé

No Description détaillée Fabricant
UDN2936 3-PHASE BRUSHLESS DC MOTOR CONTROLLER/DRIVER Allegro MicroSystems
Allegro MicroSystems
UDN2936-120 3-PHASE BRUSHLESS DC MOTOR CONTROLLER/DRIVER Allegro MicroSystems
Allegro MicroSystems
UDN2936V 3-PHASE BRUSHLESS DC MOTOR CONTROLLER/DRIVER Sprague Electric
Sprague Electric
UDN2936W 3-PHASE BRUSHLESS DC MOTOR CONTROLLER/DRIVER Allegro MicroSystems
Allegro MicroSystems

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche