|
|
PDF HMC500LP3 Data sheet ( Hoja de datos )
| Número de pieza | HMC500LP3 | |
| Descripción | GaAs HBT VECTOR MODULATOR 1.8 - 2.2 GHz | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC500LP3 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
v01.0705
Typical Applications
The HMC500LP3 / HMC500LP3E is ideal for:
• Wireless Infrastructure HPA &
MCPA Error Correction
• Pre-Distortion or Feed-Forward Linearization
• PCS, GSM and W-CDMA Systems
• Beam Forming or RF Cancellation Circuits
Functional Diagram
13
HMC500LP3 / 500LP3E
GaAs HBT VECTOR
MODULATOR 1.8 - 2.2 GHz
Features
360° of Continuous Phase Control
40 dB of Continuous Gain Control
-162 dBm/Hz Output Noise Floor
+33 dBm Input IP3
3 x 3 mm QFN Plastic Package
General Description
The HMC500LP3 & HMC500LP3E are high dynamic
range Vector Modulator RFICs which are targeted
for RF predistortion and feed-forward cancellation
circuits, as well as RF cancellation and beam forming
amplitude/phase correction circuits. The I & Q ports
of the HMC500LP3 & HMC500LP3E can be used
to continuously vary the phase and amplitude of RF
signals by up to 360 degrees and 40 dB respectively,
while supporting a 3 dB modulation bandwidth
of 150 MHz. With an input IP3 of +33 dBm and
input noise floor of -152 dBm/Hz (at -10 dB maximum
gain setting), the input IP3/noise floor ratio is 185 dB.
13 - 34
Electrical Specifications, TA = +25° C, Vcc= +8V
Parameter
Frequency Range
Maximum Gain
Gain Variation Over Temperature
Gain Flatness Across Any 60 MHz Bandwidth
Gain Range
Input Return Loss
Output Return Loss
Input Power for 1dB Compression (P1dB)
Input Third Order Intercept (IP3)
Output Noise
Control Port Bandwidth (-3 dB)
Control Port Impedance
Control Port Capacitance
Control Voltage Range
Group Delay Over 60 MHz Bandwidth
Supply Current (Icq)
Min.
-14
13
Typ.
1.8 - 2.2
-10
0.012
0.15
40
17
15
16
33
-162
150
1.45k
0.22
+0.5 to +2.5
20
90
Max.
0.02
Unless otherwise noted, measurements are made @ max. gain setting and 45˚ phase setting.
See application circuit for details.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Units
GHz
dB
dB / °C
dB
dB
dB
dB
dBm
dBm
dBm/Hz
MHz
Ohms
pF
Vdc
ps
mA
1 page  
v01.0705
HMC500LP3 / 500LP3E
GaAs HBT VECTOR
MODULATOR 1.8 - 2.2 GHz
Pin Description
Pin Number
Function
1, 4, 7, 8, 10 - 12,
N/C
Description
No connection. These plus may be connected to RF ground.
Performance will not be affected
Interface Schematic
2, 3
IN, IN
Differential RF inputs, 50 Ohms. Must be DC blocked.
13
5, 15
In-phase control input. Pins 5 and 15 are redundant.
I Either input can be used.
6, 16
Quadrature control input. Pins 6 and 16 are redundant.
Q Either input can be used.
9 RFOUT
RF Output: Must be DC blocked.
13 Vcc
Supply Voltage
GND
Ground: Backside of package has exposed metal ground slug
which must be connected to RF/DC ground.
13 - 38
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet HMC500LP3.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC500LP3 | GaAs HBT VECTOR MODULATOR 1.8 - 2.2 GHz | Hittite Microwave Corporation |
| HMC500LP3E | GaAs HBT VECTOR MODULATOR 1.8 - 2.2 GHz | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |