|
|
Número de pieza | HMC525LC4 | |
Descripción | GaAs MMIC I/Q MIXER 4 - 8.5 GHz | |
Fabricantes | Hittite Microwave Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC525LC4 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! v00.0105
Typical Applications
The HMC525LC4 is ideal for:
• Point-to-Point and Point-to-Multi-Point Radio
• VSAT
12 Functional Diagram
HMC525LC4
GaAs MMIC I/Q MIXER
4 - 8.5 GHz
Features
Wide IF Bandwidth: DC - 3.5 GHz
Image Rejection: 40 dB
LO to RF Isolation: 50 dB
High Input IP3: +23 dBm
RoHS Compliant 4 x 4 mm SMT Package
General Description
The HMC525LC4 is a compact I /Q MMIC mixer in
a leadless “Pb free” RoHS compliant SMT package,
which can be used as either an Image Reject Mixer
or a Single Sideband Upconverter. The mixer
utilizes two standard Hittite double balanced
mixer cells and a 90 degree hybrid fabricated
in a GaAs MESFET process. A low frequency
quadrature hybrid was used to produce a 100 MHz
USB IF output. This product is a much smaller
alternative to hybrid style Image Reject Mixers and
Single Sideband Upconverter assemblies. The
HMC525LC4 eliminates the need for wire bonding
allowing use of surface mount manufacturing
techniques.
Electrical Specifications, TA = +25° C, IF= 100 MHz, LO = +15 dBm*
Parameter
Frequency Range, RF/LO
Frequency Range, IF
Conversion Loss (As IRM)
Image Rejection
1 dB Compression (Input)
LO to RF Isolation
LO to IF Isolation
IP3 (Input)
Amplitude Balance
Phase Balance
Min.
20
33
14
Typ.
4.0 - 8.5
DC - 3.5
8
35
+14
45
20
+23
0.3
8
Max.
11
Min. Typ.
5.5 - 7.5
DC - 3.5
7.5
30 40
+15
40 50
17 20
+23
0.2
4
Max.
9.5
Units
GHz
GHz
dB
dB
dBm
dB
dB
dBm
dB
Deg
12 - 358
* Unless otherwise noted, all measurements performed as downconverter.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page v00.0105
HMC525LC4
GaAs MMIC I/Q MIXER
4 - 8.5 GHz
12
Pin Descriptions
Pin
Number
Function
1, 2, 6-8,
10, 13,
17-24
N/C
3, 5, 12,
14, 16
GND
4 RF
9 IF1
11 IF2
15 LO
Description
No connection required. These pins may be connected
to RF/DC ground without affecting performance.
These pins and package bottom must be connected
to RF/DC ground.
RF Port. This pin is AC coupled and matched to
50 Ohms from 4 to 8.5 GHz.
IF Port. This pin is DC coupled. For applications
not requiring operation to DC, this port should be
DC blocked externally using a series capacitor whose
value has been chosen to pass the necessary IF
frequency range. For operation to DC, this pin must not
source/sink more than 3mA of current or part non-func-
tion and possible part failure will result.
LO Port. This pin is AC coupled and matched to
50 Ohms from 4 to 8.5 GHz.
Interface Schematic
12 - 362
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet HMC525LC4.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC525LC4 | GaAs MMIC I/Q MIXER 4 - 8.5 GHz | Hittite Microwave Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |