DataSheetWiki


TC126 fiches techniques PDF

Microchip Technology - (TC125) PFM Step-Up DC/DC Regulators

Numéro de référence TC126
Description (TC125) PFM Step-Up DC/DC Regulators
Fabricant Microchip Technology 
Logo Microchip Technology 





1 Page

No Preview Available !





TC126 fiche technique
TC125/TC126
PFM Step-Up DC/DC Regulators
Features
• Assured Start-up at 0.9V
• PFM (100kHz Max Operating Frequency)
• 40µA Maximum Supply Current
(VOUT = 3V @ 30mA)
• 0.5µA Shutdown Mode (TC125)
• Voltage Sense Input (TC126)
• Requires Only Three External Components
• 80mA Maximum Output Current
• Small Package: 5-Pin SOT-23A
Applications
• Palmtops/PDAs
• Battery-Operated Systems
• Cameras
• Portable Communicators
Device Selection Table
Part
Number
Output
Voltage
(V)*
Package
Operating
Temp.
Range
TC125501ECT 5.0 5-Pin SOT-23A -40°C to +85°C
TC125331ECT 3.3 5-Pin SOT-23A -40°C to +85°C
TC125301ECT 3.0 5-Pin SOT-23A -40°C to +85°C
TC126503ECT 5.0 5-Pin SOT-23A -40°C to +85°C
TC126333ECT 3.3 5-Pin SOT-23A -40°C to +85°C
TC126303ECT 3.0 5-Pin SOT-23A -40°C to +85°C
*Other output voltages are available. Please contact
Microchip Technology Inc. for details.
Package Type
5-Pin SOT-23A
LX
GND
LX
GND
5 45 4
TC125
TC126
1
SHDN
2
PS
3
NC
12
SENSE VDD
3
NC
NOTE: 5-Pin SOT-23A is equivalent to the EIAJ SC-74A
General Description
The TC125/126 step-up (Boost) switching regulators
furnish output currents to a maximum of 80mA
(VIN = 2V, VOUT = 3V) with typical efficiencies above
80%. These devices employ pulse frequency modula-
tion (PFM) for minimum supply current at low loads.
They are ideal for battery-operated applications
powered from one or more cells. Maximum supply
current is less than 70µA at full output load, and less
than 5µA in standby (VOUT = 3V). Both devices require
only an external inductor, diode, and capacitor to
implement a complete DC/DC regulator.
The TC126 has separate output voltage sensing and
chip power inputs for greater application flexibility. The
TC125 combines the output voltage sensing and chip
power inputs onto a single package pin, but adds a
power-saving shutdown mode that suspends regulator
operation and reduces supply current to less than
0.5µA when the shutdown control input (SHDN) is low.
The TC125/TC126 are available in a small 5-Pin
SOT-23A package, occupy minimum board space and
use small external components. The TC125 accepts
input voltages from 2V to 10V. The TC126 accepts
input voltages from 2.2V to 10V. Both the TC125 and
TC126 have a start-up voltage of 0.9V at light load.
Typical Application
Sumida
100µH CD54
VIN
MA735
2 x "AA"
Cell
+
3V
54
LX GND
TC125
SHDN PS
12
NC
3
VOUT
5V @80mA
+
47µF/16V
Tantalum
Two Cell to 5V Boost Regulator
© 2002 Microchip Technology Inc.
DS21372B-page 1

PagesPages 12
Télécharger [ TC126 ]


Fiche technique recommandé

No Description détaillée Fabricant
TC120 PWM/PFM Step-Down Combination Regulator/Controller Microchip Technology
Microchip Technology
TC1202A Display Module Winstar
Winstar
TC1211 PWM controller with low-cost green energy technology for low EMI Zetex
Zetex
TC1219 (TC1220) Switched Capacitor Voltage Converters with Shutdown in SOT Packages Microchip Technology
Microchip Technology

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche