DataSheet.es    


PDF TA4012FU Data sheet ( Hoja de datos )

Número de pieza TA4012FU
Descripción UHF WIDE BAND AMPLIFIER APPLICATIONS
Fabricantes Toshiba Semiconductor 
Logotipo Toshiba Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de TA4012FU (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! TA4012FU Hoja de datos, Descripción, Manual

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA4012FU
UHF Wide Band Amplifier Applications
TA4012FU
Features
z Low current: ICC = 6.5 mA
z Wide band: f = 2.0 GHz (3dB down)
z Operatin supply voltage: VCC = 1.5~2.2 V
Pin Assignment
Absolute Maximum Ratings (Ta = 25°C)
Weight: 0.006 g (typ.)
Characteristic
Symbol
Rating
Unit
Supply voltage 1
Supply voltage 2
Total power dissipation
Operating temperature
Storage temperature
VCC1
VCC2 (Note 1)
PD (Note 2)
Topr
Tstg
2.2
3
300
40~85
55~150
V
V
mW
°C
°C
Note:
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: When VCC is operated at less than 1/4 duty cycle.
Note 2: When mounted on the glass epoxy of 2.5 cm2 × 1.6 t
Caution
This device electrostatic sensitivity. Please handle with caution.
1 2007-11-01

1 page




TA4012FU pdf
TA4012FU
RESTRICTIONS ON PRODUCT USE
The information contained herein is subject to change without notice.
20070701-EN GENERAL
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
5 2007-11-01

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet TA4012FU.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
TA4012FUHF WIDE BAND AMPLIFIER APPLICATIONSToshiba Semiconductor
Toshiba Semiconductor
TA4012FUUHF WIDE BAND AMPLIFIER APPLICATIONSToshiba Semiconductor
Toshiba Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar