DataSheetWiki


UC2823A fiches techniques PDF

Unitrode - High Speed PWM Controller

Numéro de référence UC2823A
Description High Speed PWM Controller
Fabricant Unitrode 
Logo Unitrode 





1 Page

No Preview Available !





UC2823A fiche technique
UC1823A,B/1825A,B
UC2823A,B/2825A,B
UC3823A,B/3825A,B
High Speed PWM Controller
FEATURES
• Improved versions of the
UC3823/UC3825 PWMs
• Compatible with Voltage or
Current-Mode Topologies
• Practical Operation at Switching
Frequencies to 1MHz
• 50ns Propagation Delay to Output
• High Current Dual Totem Pole
Outputs (2A Peak)
• Trimmed Oscillator Discharge
Current
• Low 100µA Startup Current
• Pulse-by-Pulse Current Limiting
Comparator
• Latched Overcurrent Comparator
With Full Cycle Restart
BLOCK DIAGRAM
DESCRIPTION
The UC3823A & B and the UC3825A & B family of PWM control ICs are im-
proved versions of the standard UC3823 & UC3825 family. Performance en-
hancements have been made to several of the circuit blocks. Error amplifier gain
bandwidth product is 12MHz while input offset voltage is 2mV. Current limit
threshold is guaranteed to a tolerance of 5%. Oscillator discharge current is spec-
ified at 10mA for accurate dead time control. Frequency accuracy is improved
to 6%. Startup supply current, typically 100µA, is ideal for off-line applications.
The output drivers are redesigned to actively sink current during UVLO at no
expense to the startup current specification. In addition each output is capable
of 2A peak currents during transitions.
Functional improvements have also been implemented in this family. The
UC3825 shutdown comparator is now a high-speed overcurrent comparator with
a threshold of 1.2V. The overcurrent comparator sets a latch that ensures full
discharge of the soft start capacitor before allowing a restart. While the fault latch
is set, the outputs are in the low state. In the event of continuous faults, the soft
start capacitor is fully charged before discharge to insure that the fault frequency
does not exceed the designed soft start period. The UC3825 Clock pin has be-
come CLK/LEB. This pin combines the functions of clock output and leading
edge blanking adjustment and has been buffered for easier interfacing.
continued
* Note: 1823A,B Version Toggles Q and Q are always low
9/95
UDG-95101

PagesPages 9
Télécharger [ UC2823A ]


Fiche technique recommandé

No Description détaillée Fabricant
UC2823 High Speed PWM Controller Unitrode
Unitrode
UC2823 High Speed PWM Controller (Rev. B) Texas Instruments
Texas Instruments
UC2823A High Speed PWM Controller Unitrode
Unitrode
UC2823A UC2823x UC2825x UC3823x UC3825x: High Speed PWM Controller (Rev. E) Texas Instruments
Texas Instruments

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche