DataSheetWiki


MAX4020 fiches techniques PDF

Maxim Integrated - Low-Cost / High-Speed / SOT23 / Single-Supply Op Amps with Rail-to-Rail Outputs

Numéro de référence MAX4020
Description Low-Cost / High-Speed / SOT23 / Single-Supply Op Amps with Rail-to-Rail Outputs
Fabricant Maxim Integrated 
Logo Maxim Integrated 





1 Page

No Preview Available !





MAX4020 fiche technique
19-1246; Rev 0; 7/97
Low-Cost, High-Speed, SOT23, Single-Supply
Op Amps with Rail-to-Rail Outputs
_______________General Description
The MAX4012 single, MAX4016 dual, MAX4018 triple,
and MAX4020 quad op amps are unity-gain-stable
devices that combine high-speed performance with
Rail-to-Rail® outputs. The MAX4018 has a disable fea-
ture that reduces power-supply current to 400µA and
places its outputs into a high-impedance state. These
devices operate from a +3.3V to +10V single supply or
from ±1.65V to ±5V dual supplies. The common-mode
input voltage range extends beyond the negative
power-supply rail (ground in single-supply applica-
tions).
These devices require only 5.5mA of quiescent supply
current while achieving a 200MHz -3dB bandwidth and
a 600V/µs slew rate. These parts are an excellent solu-
tion in low-power/low-voltage systems that require wide
bandwidth, such as video, communications, and instru-
mentation. In addition, when disabled, their high output
impedance makes them ideal for multiplexing applica-
tions.
The MAX4012 comes in a miniature 5-pin SOT23 pack-
age, while the MAX4016 comes in 8-pin µMAX and SO
packages. The MAX4018/MAX4020 are available in a
space-saving 16-pin QSOP, as well as a 14-pin SO.
________________________Applications
Set-Top Boxes
Surveillance Video Systems
Battery-Powered Instruments
Video Line Driver
Analog-to-Digital Converter Interface
CCD Imaging Systems
Video Routing and Switching Systems
__________Typical Operating Circuit
____________________________Features
o Low-Cost
o High Speed:
200MHz -3dB Bandwidth (MAX4012)
150MHz -3dB Bandwidth (MAX4016/18/20)
30MHz 0.1dB Gain Flatness
600V/µs Slew Rate
o Single 3.3V/5.0V Operation
o Rail-to-Rail Outputs
o Input Common-Mode Range Extends Beyond VEE
o Low Differential Gain/Phase: 0.02%/0.02°
o Low Distortion at 5MHz:
-78dBc SFDR
-75dB Total Harmonic Distortion
o High Output Drive: ±120mA
o 400µA Shutdown Capability (MAX4018)
o High Output Impedance in Off State (MAX4018)
o Space-Saving SOT23-5, µMAX, or QSOP Packages
______________Ordering Information
PART
TEMP.
RANGE
PIN-
PACKAGE
SOT
TOP
MARK
MAX4012EUK -40°C to +85°C 5 SOT23-5 ABZP
MAX4016ESA -40°C to +85°C 8 SO
MAX4016EUA -40°C to +85°C 8 µMAX
Ordering Information continued at end of data sheet.
_________________Pin Configurations
RF
24
MAX4012
IN
RTIN
50
RTO
50VOUT
ZO = 50
RO
50
UNITY-GAIN LINE DRIVER
(RL = RO + RTO)
TOP VIEW
OUT 1
5 VCC
MAX4012
VEE 2
IN+ 3
4 IN-
SOT23-5
Pin Configurations continued at end of data sheet.
Rail-to-Rail is a registered trademark of Nippon Motorola Ltd.
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800
For small orders, phone 408-737-7600 ext. 3468.

PagesPages 16
Télécharger [ MAX4020 ]


Fiche technique recommandé

No Description détaillée Fabricant
MAX402 Micropower Op Amps Maxim Integrated
Maxim Integrated
MAX4020 Low-Cost / High-Speed / SOT23 / Single-Supply Op Amps with Rail-to-Rail Outputs Maxim Integrated
Maxim Integrated
MAX4020EEE Low-Cost / High-Speed / SOT23 / Single-Supply Op Amps with Rail-to-Rail Outputs Maxim Integrated
Maxim Integrated
MAX4020ESD Low-Cost / High-Speed / SOT23 / Single-Supply Op Amps with Rail-to-Rail Outputs Maxim Integrated
Maxim Integrated

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche