DataSheetWiki


MAX3460CPD fiches techniques PDF

Maxim Integrated - +5V / Fail-Safe / 20Mbps / Profibus RS-485/ RS-422 Transceivers

Numéro de référence MAX3460CPD
Description +5V / Fail-Safe / 20Mbps / Profibus RS-485/ RS-422 Transceivers
Fabricant Maxim Integrated 
Logo Maxim Integrated 





1 Page

No Preview Available !





MAX3460CPD fiche technique
19-2217; Rev 1; 2/03
+5V, Fail-Safe, 20Mbps, Profibus RS-485/
RS-422 Transceivers
General Description
The MAX3460–MAX3464 are high-speed differential
bus transceivers for RS-485 and RS-422 communica-
tions. They are designed to meet TIA/EIA-422-B,
TIA/EIA-485-A, V.11, and X.27 standards. The trans-
ceiver complies with the Profibus specification provid-
ing +2.1V output level with a 54load, 20Mbps data
rate, and output skew less than 2ns. Each part contains
one three-state differential line driver and one differen-
tial input line receiver. The devices operate from a +5V
supply and feature true fail-safe circuitry, which guaran-
tees a logic-high receiver output when the receiver
inputs are open or shorted. This enables all receiver
outputs on a terminated bus to output logic highs when
all transmitters are disabled.
All devices feature a 1/4 standard unit load receiver
input impedance that allows 128 transceivers on the
bus. Driver and receiver propagation delays are guar-
anteed under 20ns for multidrop, clock distribution
applications. Drivers are short-circuit current limited
and are protected against excessive power dissipation
by thermal shutdown circuitry. The driver and receiver
feature active-high and active-low enables, respective-
ly, that can be connected together externally to serve
as a direction control.
Features
o Recommended for Profibus Applications
o Guaranteed 20Mbps Data Rate
o 20ns Transmitter and Receiver Propagation Delay
o 2ns Transmitter and Receiver Skew
o High Differential Driver Output Level (2.1V on 54)
o Hot-Swap Versions
o 1µA Shutdown Supply Current
o Low Supply Current Requirements (2.5mA typ)
o Allow Up to 128 Transceivers on the Bus
o True Fail-Safe Receiver while Maintaining EIA/TIA-
485 Compatibility
o Designed for Multipoint Transmissions on Long
or Noisy Bus Lines
o Full Duplex and Half Duplex Versions Available
o Phase Controls to Correct for Twisted-Pair
Reversal for 14-Pin Versions
o Current-Limiting and Thermal Shutdown for
Driver Overload Protection
Applications
High-Speed RS-485 Communications
High-Speed RS-422 Communications
Level Translators
Industrial-Control Local Area Networks
Profibus Applications
Ordering Information
PART
MAX3460CSD
MAX3460CPD
MAX3460ESD
MAX3460EPD
TEMP RANGE
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
14 SO
14 Plastic DIP
14 SO
14 Plastic DIP
Ordering Information continued at end of data sheet.
Pin Configurations appear at end of data sheet.
Selector Guide
PART
NUMBER
MAX3460
MAX3461
MAX3462
MAX3463
MAX3464
HALF/FULL
DUPLEX
Full
Full
Full
Half
Half
RECEIVER/
DRIVER
ENABLE
Yes
Yes
No
Yes
Yes
LOW-
POWER
SHUTDOWN
Yes
Yes
No
Yes
Yes
HOT SWAP
Yes
No
No
Yes
No
RECEIVER/
DRIVER PHASE
SELECT
Yes
Yes
No
No
No
INDEPENDENT
SHDN PIN
Yes
Yes
No
No
No
PIN COUNT
14
14
8
8
8
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

PagesPages 14
Télécharger [ MAX3460CPD ]


Fiche technique recommandé

No Description détaillée Fabricant
MAX3460CPD +5V / Fail-Safe / 20Mbps / Profibus RS-485/ RS-422 Transceivers Maxim Integrated
Maxim Integrated

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche